Siemens SIMATIC IPC677D 6AV7260-1DA30-1EX6 Panel PC

Description

This Siemens SIMATIC IPC677D, model 6AV7260-1DA30-1EX6, is an industrial Panel PC designed for robust performance in automation and control applications. It integrates a 19-inch touchscreen display with a resolution of 1366x768 and is powered by an Intel Core i3-4330TE processor. The unit is equipped with 8 GB of DDR3 RAM, a 500 GB SATA HDD, and a comprehensive set of I/O including dual Gigabit Ethernet, USB 3.0, and a serial port. Integrated monitoring for watchdog, temperature, and fan status, along with an onboard RAID controller, ensures high system availability. This Panel PC operates on a 24 V DC industrial power supply.

Features

• 19-inch touchscreen display (1366 x 768 resolution)
• Intel Core i3-4330TE processor (2.4 GHz, 2 Cores / 4 Threads)
• 8 GB DDR3 1600 DIMM memory
• 500 GB SATA Hard Disk Drive (HDD)
• Dual 10/100/1000 Mbit/s Ethernet ports
• Multiple USB ports including 4x USB 3.0 and a front-accessible port
• Onboard RAID controller for data redundancy
• Integrated system monitoring for watchdog, temperature, and fan
• Powered by a 24 V DC industrial power supply

Applications

• Human-Machine Interface (HMI) stations
• SCADA and process visualization nodes
• Machine control and data acquisition terminals
• Industrial data logging and reporting
• Factory floor information systems

Technical Specifications

Installation Guidelines

1. 1
   Panel Mounting: Ensure the control cabinet or panel cutout dimensions match the IPC's specifications for a secure fit. Use all provided mounting clamps and tighten them evenly to the manufacturer's recommended torque to ensure a proper seal and prevent chassis distortion.
2. 2
   Power Connection: Connect a stable, filtered 24 V DC power source to the designated power input terminals. Verify correct polarity (+/-) before applying power. Use appropriately sized conductors for the load and distance from the power supply.
3. 3
   Protective Earth (PE) Grounding: Connect the chassis grounding terminal to the main protective earth bus bar of the cabinet using a low-impedance conductor. A proper ground connection is critical for operator safety and noise immunity.
4. 4
   I/O and Network Cabling: Connect Ethernet, USB, and serial cables. Route signal cables separately from high-voltage power lines to minimize electromagnetic interference (EMI). Use shielded cables for network and serial communications where specified, ensuring shields are properly terminated.
5. 5
   System Startup: After verifying all connections, apply power to the unit. The pre-installed operating system should boot automatically. Proceed with application software installation and system configuration as required.