Hersteller: Mitsubishi Electric
Produkt-Nr.: GT2710-VTWA
Herkunftsland:Vereinigte Staaten
Produkttyp: HMI Operator Panels
Zahlung: T/T, Western Union
Gewicht: 8g
Abmessungen: 303 mm x 218 mm x 52 mm
Versandhafen: Xiamen
Garantie: 12 Monate
Engineered to deliver high-performance human-machine interface functionality in demanding industrial environments, the Mitsubishi Electric GT2710-VTWA acts as an advanced control panel node within the GOT2000 Series platform. This high-specification graphic operation terminal is equipped with intuitive multi-touch gesture functions, enabling operators to swipe, pinch, and zoom for precise visualization and machine control. Featuring a 10.4-inch TFT color display, a clean white frame bezel, and wide-range AC power compatibility, this terminal ensures optimal system monitoring, alarm diagnostics, and data logging capabilities direct from the control enclosure.
| Parameter | Specification Value |
|---|---|
| Manufacturer | Mitsubishi Electric |
| Model Number | GT2710-VTWA |
| Series | GOT2000 Series (GT27) |
| Display Type | TFT Color LCD |
| Screen Size | 10.4 inches |
| Resolution | 640 x 480 Pixels (VGA) |
| Frame Color | White |
| Input Power Supply Voltage | 100 to 240 VAC (+10%, -15%) |
| Power Consumption (Max) | 41 W or less |
| Inrush Current | 60 A or less (2 ms, ambient 25 degC, max load) |
| Operating Ambient Temperature | 0 to 55 degC (horizontal), 0 to 50 degC (vertical) |
| Operating Ambient Humidity | 10 to 90% RH (non-condensing) |
| Insulation Resistance | 10 MOhm or higher (500 VDC) |
| Applicable Wire Size | 0.75 to 2 mm² |
| Terminal Block Screw | M3 (Tightening torque: 0.5 to 0.8 N.m) |
| External Dimensions (W x H x D) | 303 mm x 218 mm x 52 mm |
| Net Weight (Excl. Brackets) | 2.1 kg |
| Shipping Weight (Calculated) | 8.0 kg |
| Interface Type | Connector / Pin Configuration | Function / Protocol Support |
|---|---|---|
| Ethernet Port | 1x RJ-45 Channel | Modbus/TCP, MC Protocol, Host PLC Communications |
| Serial Interface (CH1) | D-Sub 9-pin Male | RS-232 serial programming, peripheral connectivity |
| Serial Interface (CH2) | D-Sub 9-pin Female | RS-422/485 multi-drop network links |
| USB Ports | Type-A (Host) / Type Mini-B (Device) | Data export, firmware transfer, external mouse/keyboard |
| Storage Slot | 1x SD Memory Card Slot | OS backup, project storage, and CSV logging parameters |
When migrating legacy systems from the GT16 or GT15 series to the GT2710-VTWA, screen configuration layouts can be upscaled using the GT Works3 software tool. Note that the "W" in the product suffix dictates a specialized white bezel; check chemical compatibility when utilizing this version in food-processing operations where aggressive sanitation agents are in use. For drop-in mechanical sizing, ensure panel cutouts precisely match the standard GOT2000 10.4-inch dimensions.
Thermal performance varies based on mounting geometry. When mounted vertically, the internal convective heat flow is restricted; therefore, the maximum safe operating temperature is reduced to 50 degC. Ensure at least 100 mm of clear space is maintained between the rear of the terminal and adjacent circuit components (such as variable frequency drives or high-power contactors) to mitigate induced heat and localized hotspots.
To protect the sensitive electronics on the power board, the terminal block must be wired with class-appropriate terminal lugs (RAV1.25-3 or V2-S3.3). Grounding must be completed using a dedicated ground wire with a cross-section of 2 mm² or larger, connected directly to a Class-3 protective ground bus. Avoid routing the terminal's power lines parallel to motor output lines or primary utility feeders to eliminate electromagnetic interference.
CRITICAL WARNING:
Before initiating mounting, physical installation, or wire terminations on the terminal block, isolate all AC mains distribution lines. Confirm with a calibrated digital multimeter that no stray residual charge or live voltage exists at the terminal block. Failure to de-energize can damage internal logic layers and present an immediate risk of electrical shock to commissioning staff.
Globaler Expressversand
Rückgaben & Garantie
Bestellungen werden von Montag bis Freitag bearbeitet und geliefert (außer an Feiertagen).
Für vollständige Anspruchsvoraussetzungen, Wiedereinlagerungsgebühren und internationale Rückgabebedingungen lesen Sie bitte unsere offiziellen Rückerstattungs- & Rückgaberecht .
| Country of origin |
Vereinigte Staaten
|
Der Artikel erklärt mehrere erweiterte Boolesche Logikfunktionen, die in der SPS-Programmierung über die grundlegenden AND-, OR- und NOT-Operationen hinaus verwendet werden. Er behandelt, wie...
Die boolesche Logik ist die Grundlage jedes SPS-Programms. Von einfachen Maschinensteuerungen bis hin zu komplexen industriellen Automatisierungssystemen bestimmen Logikgatter, wie Steuerungen auf...
Industrielle Firewalls spielen eine entscheidende Rolle in der OT-Cybersicherheit, indem sie PLC-, DCS- und SCADA-Netzwerke durch Segmentierung, Ein- und Ausgangskontrolle sowie IDS/IPS-Integration...
Moderne robotische Greifer entwickeln sich über traditionelle mechanische Greifbacken hinaus. Von gecko-inspirierten Haftsystemen und weichen, lebensmittelechten Greifern bis hin zu KI-gestützten...
Von seilgetriebenen Gleichstromkompressoren bis hin zu batteriebetriebenen Grubenwagen markierten frühe Bergbauoperationen einen Wendepunkt in der industriellen Elektrifizierung. Dieser Artikel...
Factory I/O revolutioniert die SPS-Ausbildung, indem es immersive 3D-Industriesimulationen für Studenten, Ingenieure und Wartungsteams bereitstellt. Die Plattform überbrückt die Lücke zwischen...
