Bently Nevada 330102-00-50-10-02-05 3300 XL 8 mm Proximity Probe with Armor

Description

330102-00-50-10-02-05: 3300 XL 8 mm proximity probe with 3/8-24 UNF thread, stainless steel armor, fully threaded 0.0 in unthreaded length (Option 00), 5.0 in overall case length (Option 50), 1.0 m total length (Option 10), and standard ClickLoc coaxial connector (Option 02) with ATEX, IECEx, and CSA approvals (Option 05).

Unlike standard unarmored configurations like the 330101, the 330102 includes protective stainless steel flexible armor, making it suitable for environments with high mechanical stress or abrasion. It is designed to work in conjunction with a 3300 XL Proximitor sensor and standard extension cable to form a complete non-contact eddy-current proximity system.

Features

• Stainless steel flexible armor sheathing provides physical protection for the coaxial cable against abrasion and mechanical impacts.
• Option 00 designates a fully threaded case with a 0.0 in unthreaded length for maximum engagement or locknut flexibility.
• Option 50 provides a 5.0 in overall case length with standard 3/8-24 UNF-2A threads.
• Option 10 supplies a 1.0 m (3.3 ft) total length from the probe tip to the ClickLoc connector.
• Option 02 features a miniature gold-plated coaxial ClickLoc connector with a standard cable jacket.
• Option 05 comes certified with CSA, ATEX, and IECEx safety ratings for installation in hazardous area locations.

Applications

Typical applications include non-contact shaft vibration, axial position, and speed measurements on major rotating machinery. It is widely used in power generation, chemical processing, oil and gas, and wastewater industries to monitor steam turbines, gas turbines, centrifugal compressors, reciprocating compressors, industrial pumps, and gearboxes.

Ordering Information

Technical Specifications

Connections and Interfaces

Installation Guidelines

Ensure standard mounting practices are observed during probe installation. Tighten the probe body to the recommended torque limits and do not exceed the maximum thread engagement length of 0.563 in (14.3 mm) to avoid binding. Maintain a minimum bend radius of 25.4 mm (1.0 in) for the armored cable sheath. The probe tip must be kept clear of adjacent metal by a minimum side-view clearance diameter of 40 mm (1.6 in) to prevent measurement interference.

Compliance and Certifications