Bently Nevada 330103-00-04-10-02-05 3300 XL 8mm Proximity Probe

Description

330103-00-04-10-02-05: 3300 XL 8 mm proximity probe, M10 x 1 metric thread, Option 00 unthreaded length (0 mm), Option 04 case length (40 mm), Option 10 total length (1.0 m), Option 02 coaxial connector, and Option 05 approvals.

This specific configuration lacks protective armor, in contrast to armored options like the 330104 series. It employs a standard coaxial cable without connector protection, which differentiates it from Option 01 variants that include a terminal connector protector. The metric M10 x 1 thread housing fits directly into standard metric mounting taps.

Features

• Metric Thread Specification: M10 x 1 thread housing allows direct installation in metric machine casings.
• Fully Threaded Case: 0 mm unthreaded length (Option 00) with a 40 mm overall case length (Option 04) fits shallow clearance installations.
• 1.0-Meter Total Length: Integrated standard coaxial cable (Option 10) connects directly to standard 3300 XL extension cables.
• Miniature ClickLoc Connector: Gold-plated ClickLoc coaxial connector (Option 02) provides low contact resistance without connector protectors.
• Hazardous Area Certified: Approved under option 05 for CSA, ATEX, and IECEx intrinsic safety and non-incendive environments.

Applications

Typical industrial monitoring environments include:

• Radial vibration measurements on high-speed rotating machinery
• Axial thrust position monitoring on steam and gas turbines
• Shaft eccentricity and rotational speed (keyphasor) sensing
• Critical machinery protection in petrochemical plants, power generation facilities, and gas compression stations

Ordering Information

Technical Specifications

Installation Guidelines

• Torque Limits: Do not exceed 12 N-m (110 in-lb) of torque when installing the probe case into the metric casing thread.
• Bend Radius: Maintain a minimum bend radius of 25.4 mm (1.0 inch) for the standard coaxial cable.
• Connection Integrity: Ensure the ClickLoc connectors are fully clean, dry, and clicked securely. Avoid exposing the unshielded connection directly to turbine oil.

Compliance and Certifications

• CSA: Class I, Division 1, Groups A, B, C, D; Class II, Groups E, F, G; Class III
• ATEX: Ex ia IIC T4/T5 Ga
• IECEx: Ex ia IIC T4/T5 Ga
• CE Mark: Complies with relevant European Union directives