Bently Nevada 330103-00-13-10-02-00 3300 XL 8 mm Proximity Probe

Description

330103-00-13-10-02-00 specifies a 3300 XL 8 mm proximity probe with an M10 x 1 metric thread, configured with a 0 mm unthreaded length, a 130 mm overall case length, a 1.0 meter total length, a standard coaxial cable with a miniature ClickLoc connector, and no hazardous area approvals. This eddy-current sensor is used for rotating machinery protection, providing physical position or dynamic vibration measurements.

This specific configuration differs from the armored variations and standard unthreaded options by featuring a fully threaded metric body with no protective stainless steel armor over the 1.0-meter FEP coaxial cable. The probe connects directly to a standard 3300 XL extension cable and is designed to operate without agency approval requirements, making it ideal for standard general-purpose machinery monitoring environments where hazardous area ratings are unnecessary.

Features

• Option 00 designates a 0 mm unthreaded length, allowing full-depth thread engagement in metric mounts.
• Option 13 specifies a 130 mm overall case length to reach deep-set measuring points.
• Option 10 provides a 1.0-meter (3.3 feet) integrated FEP triaxial coaxial cable.
• Option 02 represents a miniature coaxial ClickLoc connector on standard unarmored cable.
• Option 00 specifies that hazardous area agency approvals are not required.
• 8.0 mm probe tip diameter constructed of robust polyphenylene sulfide (PPS).
• Probe body engineered from AISI 303 stainless steel to resist oxidation and harsh conditions.

Applications

• Radial vibration and axial position measurements on high-speed fluid-film bearing machinery.
• Keyphasor reference measurements and rotational speed sensing.
• Machinery condition monitoring systems across oil, gas, power generation, and chemical plants.

Ordering Information

Technical Specifications

Installation Guidelines

When installing this proximity probe, maintain adequate lateral clearance (at least 40 mm) from surrounding metallic structures to avoid signal interference. Adjust the physical gap between the probe tip and the target shaft to a nominal distance of 1.27 mm (50 mils) to achieve a standard output of roughly -10 Vdc from the associated Proximitor. Do not exceed the maximum mounting torque of 33.9 N-m (300 in-lbf) when securing the metric case. Run the FEP coaxial cable ensuring the bend radius does not drop below 25.4 mm (1.0 in) to prevent damaging internal triaxial layers. General-purpose installations should shield cable junctions from fluid or chemical exposures.