Bently Nevada 330104-00-11-05-02-00 3300 XL 8 mm Proximity Probe with Armor

Description

330104-00-11-05-02-00 specifies this M10 x 1 threaded, armored 3300 XL 8 mm proximity probe configuration with 0 mm unthreaded length (fully threaded), 110 mm case length, 0.5 m total length, standard ClickLoc coaxial connector without connector protector, and no agency approvals.

This configuration incorporates stainless steel armor (flexible AISI 302 or 304 SST with FEP outer jacket) to shield the 75-ohm coaxial cable from physical wear and abrasion, distinguishing it from unarmored models such as the 330103. The 110 mm case length meets specific penetration requirements for target sensing in tight spaces. Since Option 02 is selected, it features a standard miniature coaxial ClickLoc connector without an integrated connector protector, and standard industrial non-hazardous applications are covered under Option 00 (no specialized agency certifications required).

Features

• Metric M10 x 1 thread body with integrated flexible AISI 302/304 stainless steel armor and FEP outer jacket
• Fully threaded case (0 mm unthreaded length) with 110 mm total case length
• 0.5 meter (1.6 feet) total probe length, designed to connect with standard extension cables and Proximitor sensors
• Miniature coaxial ClickLoc connector (Option 02, without connector protector)
• Non-hazardous area application rating (Option 00, agency approvals not required)
• Polyphenylene sulfide (PPS) probe tip with Viton O-ring pressure sealing

Applications

• Shaft vibration and axial position measurements in turbomachinery
• Industrial rotating machinery protection systems (steam/gas turbines, compressors, gearboxes, pumps, motors)
• High-vibration environments requiring armored cable shielding
• Machinery protection loops complying with API 670 standards

Ordering Information

Technical Specifications

Installation Guidelines

• Mount the probe through a threaded M10 x 1 bracket or panel hole.
• Use a maximum torque of 7.5 N-m (66 in-lbf) on the first three threads of standard forward-mount installation.
• Maintain the minimum cable bend radius of 25.4 mm (1.0 in) when routing the armored lead.
• Ensure the ClickLoc connector is clean and dry before mating, tightening finger-tight only (0.565 N-m).

Compliance and Certifications

• CE Compliant
• RoHS Compliant