Bently Nevada 330104-01-14-05-01-CN 3300 XL 8 mm Armored Proximity Probe

Description

330104-01-14-05-01-CN specifies this 3300 XL 8 mm metric threaded proximity probe with flexible stainless steel armor, featuring an M10 x 1 thread, a 10 mm unthreaded length (Option 01), a 140 mm overall case length (Option 14), and a 0.5-meter total length (Option 05) with a ClickLoc connector and connector protector (Option 01).

This specific configuration includes the trailing suffix -CN, which designates the China hazardous area approval package. This option certifies the transducer system for use in hazardous environments under NEPSI and CCC regulations, replacing standard agency approvals for Chinese compliance.

Features

• Metric thread format: M10 x 1 threaded stainless steel case with flexible protective armor.
• Case dimensions: 140 mm overall case length with a 10 mm unthreaded tip portion.
• Short-reach lead: 0.5-meter total cable length with integrated miniature coaxial ClickLoc connector.
• Connector protection: Pre-installed connector protector (Option 01) to safeguard against environmental contamination.
• Regulatory approval: Authorized under China NEPSI and CCC regulations with the -CN trailing suffix.

Applications

This armored metric proximity probe is deployed in demanding industrial environments where rotating machinery protection is critical. Typical use cases include:

• Shaft dynamic vibration and axial position measurements on high-speed turbines.
• Industrial machinery monitoring in petrochemical plants and refineries requiring Chinese explosion-proof certifications.
• Protection of centrifugal compressors, large fans, and heavy-duty generators.

Ordering Information

Technical Specifications

Installation Guidelines

Ensure correct system operation by adhering to professional machinery protection installation standards:

• Verify that the maximum thread engagement does not exceed 15 mm to prevent mechanical binding.
• Maintain a minimum side clearance of 8.0 mm from surrounding metal surfaces to prevent target distortion.
• Always hand-tighten the coaxial ClickLoc connectors. Do not utilize mechanical pliers which can deform gold-plated surfaces.
• Ensure the probe cable's minimum bend radius of 25.4 mm (1.0 in) is not exceeded during installation routing.

Compliance and Certifications