Bently Nevada 330130-080-01-CN 3300 XL Standard Extension Cable

Description

330130-080-01-CN specifies this 3300 XL standard extension cable configured with an 8.0 m length, armored mechanical protection, and a China-specific NEPSI/CCC hazardous area certification package.

Unlike standard unarmored configurations, this cable includes a flexible AISI 302 or 304 stainless steel armor with an outer FEP jacket that protects the internal triaxial conductor from mechanical damage and abrasive wear. The 8.0-meter length is typically selected to build a 9.0-meter total system length when combined with a standard 1.0-meter proximity probe, or a 10.0-meter total length system in specialized layouts. The trailing -CN suffix adds official CCC and NEPSI explosion-proof certifications required for hazardous industrial plant operations across China.

Features

• 8.0 meters (26.2 feet) total cable length option.
• Armored protection consisting of flexible stainless steel with an FEP outer jacket.
• 75 Ohm triaxial construction insulated with fluoroethylene propylene.
• ClickLoc gold-plated coaxial connectors on both ends.
• China hazardous area approval package (-CN suffix) featuring CCC and NEPSI certifications.
• Interchangeable with non-XL 3300 series 5 mm and 8 mm transducer components.

Applications

Common industrial applications for this extension cable include monitoring steam and gas turbine shaft vibration, monitoring compressor axial position, monitoring industrial pump rotor displacement, and implementing machine protection systems on large rotating machinery in hazardous chemical or petrochemical processing environments.

Ordering Information

Technical Specifications

Installation Guidelines

During installation, ensure the minimum bend radius of 25.4 mm is not exceeded to avoid degrading the triaxial insulation. When joining the ClickLoc connectors, tighten them finger tight; do not use pliers unless connecting non-XL stainless steel components. Use appropriate conduit or cable trays to route the armored section. Ensure that all shield and ground connections are properly terminated at the Proximitor sensor terminal strip to prevent external electrical noise interference.

Compliance and Certifications