Bently Nevada 330130-080-13-05 3300 XL Standard Extension Cable

Description

Option 080 (8.0 m cable length) and Option 13 (armored FluidLoc cable with connector protector) specify this 3300 XL extension cable configuration - 330130-080-13-05. This 3300 XL standard extension cable connects a 3300 XL 8 mm proximity probe to a 3300 XL Proximitor sensor, facilitating eddy-current displacement measurements in industrial environments. The integrated FluidLoc technology prevents oil and other lubricants from leaking through the cable interior, making it suitable for pressurized or fluid-filled machine casings.

Compared to unarmored standard cable variants, this model features heavy-duty stainless steel armor with an outer jacket, offering mechanical protection against abrasion, crushing, and physical impacts. The built-in fluorosilicone connector protectors provide environmental sealing at the connections, safeguarding against moisture and contaminant ingress. This configuration also features Option 05 hazardous area approval, certifying it for use in intrinsically safe environments with ATEX, IECEx, and CSA standards.

Features

• Option 080 provides an exact 8.0-meter cable length, forming a calibrated 9-meter system when paired with a 1.0-meter proximity probe.
• Option 13 specifies armored FluidLoc construction, preventing inner-cable fluid migration while offering heavy-duty physical armor.
• Integrated fluorosilicone connector protectors seal the gold-plated ClickLoc connectors against fluids and contamination.
• Option 05 approval package certifies the transducer system for intrinsically safe and non-incendive environments.
• Patented CableLoc design provides 330 N tensile strength to prevent cable separation at the joints.

Applications

Used primarily in industrial machinery protection and condition monitoring setups, such as:

• Steam and gas turbine shaft vibration and axial position measurement.
• Compressor and pump casing penetration points where oil containment is vital.
• Petrochemical and power generation environments requiring ATEX, IECEx, or CSA hazardous area zone ratings.
• Aggressive mechanical environments requiring robust armored shielding against physical wear.

Ordering Information

Technical Specifications

Installation Guidelines

To establish a proper installation for the 3300 XL Standard Extension Cable, observe the following engineering guidelines:

• Ensure the combined length of the extension cable and proximity probe matches the total calibrated length of the Proximitor sensor (e.g., an 8.0 m extension cable requires a 1.0 m probe for a 9.0 m system).
• Observe the minimum bend radius limit of 25.4 mm to prevent inner-core conductor fatigue or signal degradation.
• Prior to mating, inspect the gold-plated coaxial ClickLoc connectors for cleanliness. Tighten the connectors only by hand until they audibly "click" into position.
• Slide the fluorosilicone connector protectors fully over the junction to ensure complete environmental sealing against water, process chemicals, and particulate matter.

Compliance and Certifications