ACS800-01-0011-3 ABB ACS800 Single Drive Wall-Mounted Module

Product Overview

ACS800-01-0011-3 is a high-performance wall-mounted AC drive designed for precise industrial motor control in demanding environments such as oil and gas, power generation, and mining. The drive uses an R3 frame design and supports three-phase input voltages of 380 V, 400 V, and 415 V.

With advanced motor control technology, the ACS800-01-0011-3 improves process reliability while reducing mechanical stress on connected equipment. It is suitable for both variable torque and constant torque applications where stable performance and reduced downtime are critical.

Technical Configuration

The ACS800-01-0011-3 features a compact high-power-density design with efficient thermal management. Its internal cooling system provides 69 m³/h airflow and supports heat dissipation up to 250 W during operation.

The drive supports both light-overload and heavy-duty operating conditions. It delivers stable performance for industrial AC motor systems ranging from 5.5 kW to 7.5 kW applications.

Technical Specifications

Technical FAQs

What are the main output ratings of the ACS800-01-0011-3?

The drive provides a continuous output rating of 7.5 kW and 19 A under nominal operating conditions. In heavy-duty applications, it supports 5.5 kW and 14 A output.

Does the ACS800-01-0011-3 support dynamic braking?

Yes. The drive supports resistor braking and can operate with compatible braking resistors such as the SACE15RE22 for high-inertia applications.

What protection requirements are recommended for this drive?

The recommended input protection is a 20 A fuse, including compatible models such as ABB OFAF000H20 (IEC size 000).

Engineering & Installation Guide

• Thermal Management: Maintain sufficient ventilation to support the required 69 m³/h airflow and prevent overheating during continuous operation.
• Mounting Requirements: Avoid installing the R3 frame drive inside sealed or poorly ventilated cabinets.
• Brake Resistor Application: For regenerative loads, use a compatible 22 Ω braking resistor designed for the required energy dissipation capacity.
• Voltage Verification: Confirm the incoming three-phase power supply matches the 380 V to 415 V specification before startup.