Bently Nevada 330103-00-06-10-12-00 3300 XL 8 mm Proximity Probe

Description

330103-00-06-10-12-00 is a metric 3300 XL 8 mm proximity probe featuring an M10 x 1 thread and a non-armored construction. This specific configuration includes a 0.0 mm unthreaded length (Option 00) and a 60 mm case length (Option 06), designed for standard displacement measurement applications in 3300 XL monitoring chains. The probe is equipped with a 1.0 m total system length (Option 10) and utilizes a FluidLoc coaxial cable (Option 12), ensuring environmental resistance for the connector assembly. This unit does not require hazardous area agency approvals (Option 00).

The 3300 XL 8 mm probe system is a core component for monitoring shaft vibration and axial position on critical rotating machinery such as turbines, compressors, and pumps. This probe is fully compatible with 3300 XL Proximitor sensors and extension cables, maintaining interchangeability across all 3300 XL series components. The FluidLoc cable is specifically beneficial in installations where oil leakage through the cable assembly poses a potential risk to the monitoring loop.

Features

• Model 330103: Metric 8 mm probe with M10 x 1 thread, non-armored body.
• Option 00 (Unthreaded Length): 0.0 mm unthreaded section.
• Option 06 (Case Length): 60 mm total case length.
• Option 10 (Total Length): 1.0 m system length.
• Option 12 (Connector/Cable): Miniature ClickLoc coaxial connector with FluidLoc cable for enhanced environmental sealing.
• Option 00 (Agency Approval): No hazardous area certifications required.
• Compatibility: Compatible with all 3300 XL standard Proximitor sensors and extension cables.

Applications

Used for continuous non-contact radial vibration and axial position measurements in:

• Steam and gas turbine generator sets
• Centrifugal and axial compressors
• Industrial pumps and fans
• Critical rotating machinery protection systems
• High-temperature or oil-prone operating environments requiring FluidLoc protection

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is gapped correctly according to the system manual for the target machinery. The M10 x 1 threaded body should be secured using the appropriate Bently Nevada mounting bracket. When installing the FluidLoc cable, ensure no sharp bends occur at the transition point to maintain the integrity of the oil-sealing properties. The system must be connected to a matching 1.0 m Proximitor sensor configuration to ensure the total system length remains calibrated at 1.0 m.