Bently Nevada 330104-00-10-05-02-05 3300 XL 8 mm Proximity Probe

Description

The 330104-00-10-05-02-05 is a 3300 XL 8 mm proximity probe configured with a 3/8-24 UNF thread, 0.0 in unthreaded length (Option 00), 1.0 in case length (Option 10), and a 0.5 m total length (Option 05). This transducer system, featuring a standard miniature ClickLoc coaxial connector (Option 02) and CSA/ATEX/IECEx hazardous area approvals (Option 05), is designed for reliable non-contact displacement measurement in critical rotating machinery.

As part of the Bently Nevada 3300 XL 8 mm system, this probe is compatible with 3300 XL Proximitor sensors and extension cables, forming a complete measurement chain for shaft vibration and axial position monitoring. The 330104 series includes integrated armor for mechanical protection in industrial environments, ensuring durability where cable abrasion is a risk.

Features

• 0.0 in Unthreaded Length (Option 00): Fully threaded probe body suitable for installations requiring minimal unthreaded clearance.
• 1.0 in Case Length (Option 10): Compact housing length for precise mounting in standard proximity probe brackets.
• 0.5 m Total Length (Option 05): System-matched cable length for integration with specific monitoring setups.
• Standard ClickLoc Connector (Option 02): Miniature coaxial connector providing secure, reliable termination for eddy-current signal transmission.
• Hazardous Area Approval (Option 05): Certified for use in CSA, ATEX, and IECEx rated hazardous environments.
• Integrated Armor: Enhanced mechanical protection for the probe lead, suitable for high-vibration or abrasion-prone zones.

Applications

• Critical rotating machinery vibration monitoring (turbines, compressors, pumps, motors).
• Shaft axial position measurement (thrust monitoring).
• High-abrasion environments requiring armored cable protection.
• Hazardous industrial areas requiring international safety certifications (CSA, ATEX, IECEx).

Ordering Information

Technical Specifications

Installation Guidelines

• Ensure the probe is installed in a probe clamp bracket to prevent mechanical stress on the threads.
• Maintain a proper gap between the probe tip and the target material as specified by the 3300 XL monitoring system calibration.
• For hazardous area installations, ensure compliance with Bently Nevada hazardous area drawing 141092 for 'ia' (intrinsically safe) or 140979 for 'nA/ec' (non-sparking/increased safety) ratings.
• Ensure the Proximitor sensor is mounted in a location providing at least IP54 protection.

Compliance and Certifications

• CSA, ATEX, IECEx: Certified for use in hazardous areas (Intrinsically Safe and Non-Sparking).