BECKHOFF FC5121 CANopen Master/Slave Card

Hanya 10 item tinggal dalam stok

Pengilang: BECKHOFF
No. Produk: FC5121
Negara asal:Jerman
Jenis Produk: Fieldbus Cards
Pembayaran: T/T, Western Union
Berat: 500g
Dimensi: appro x . 100 mm x 130 mm
Pelabuhan penghantaran: Xiamen
Jaminan: 12 bulan

Description

Integrating PC-based control systems directly with CANopen fieldbus networks, the Beckhoff FC5121 interface card provides a high-performance PCI Express (PCIe) connection for demanding industrial automation environments. This single-channel CANopen master/slave card enables seamless communication between industrial PCs and distributed I/O, drives, or other CANopen-compliant field devices. Operating within the TwinCAT software environment, the module supports both master and slave configurations, offering flexible integration into diverse control architectures without compromising processing speed.

Features

Single-channel CANopen interface designed for standard PCI Express x1 slots.
Supports adjustable data transfer rates ranging from 10 kbaud up to 1000 kbaud.
Galvanically decoupled 9-pin D-sub connection to protect host hardware from voltage spikes.
Integrated, switchable termination resistor for simplified network topology configuration.
Onboard hardware diagnostics via dual LED indicators per channel for rapid status monitoring.
Process image capacity of up to 4 kbytes total input and output data.

Applications

Industrial PC-based automation and control systems.
Distributed I/O and motion control integration in manufacturing lines.
Machine building and factory automation systems requiring CANopen connectivity.
Test benches and real-time simulation environments.

Technical Specifications

Manufacturer	BECKHOFF
Part Number/Model	FC5121
Fieldbus Type	CANopen
PC Interface	PCI Express x1 (PCIe x1)
Number of Channels	1
Data Transfer Rates	10, 20, 50, 100, 125, 250, 500, 800, 1000 kbaud
Bus Interface	1 x D-sub socket, 9-pin, galvanically decoupled
Termination Resistor	Switchable (onboard)
Hardware Diagnostics	2 LEDs per channel
Process Image Bit Width	Max. 4 kbyte input and output data (total)
Operating Temperature	0 to +55 degC
Software Driver	TwinCAT 2.11 R3 and higher
Dimensions	Approx. 100 mm x 130 mm

Connections and Interfaces

Connector Pin	Function / Signal
Pin 2	CAN_L (CAN low bus line)
Pin 3	CAN_GND (CAN ground)
Pin 7	CAN_H (CAN high bus line)
Pin 9	CAN_V+ (Optional external positive supply)
Pins 1, 4, 5, 6, 8	NC (Not connected / Reserved)

Installation Guidelines

Ensure the Industrial PC is completely powered down and disconnected from the main power supply before inserting the card.
Insert the card firmly into a free PCI Express x1 (or higher) slot and secure the bracket to the PC chassis.
Configure the switchable termination resistor depending on the card's position in the CANopen network topology (enable if the card is at the physical end of the bus line).
Use shielded twisted-pair cabling compliant with CANopen standards to minimize electromagnetic interference.
Ground the cable shield at both ends where possible, or according to local electromagnetic compatibility (EMC) guidelines.

Compliance and Certifications

Key Features:

Does the Beckhoff FC5121 support both master and slave modes?

Yes, the FC5121 can be configured as either a CANopen master or a CANopen slave within the TwinCAT environment.

What PC interface slot is required for the FC5121?

The card requires a standard PCI Express (PCIe) x1 slot, but it can also be installed in x4, x8, or x16 PCIe slots.

Is there an integrated termination resistor on the FC5121?

Yes, the card features an onboard, switchable termination resistor that can be enabled or disabled via a physical switch on the card.

Penghantaran Ekspres Global

Penghantaran Standard: 4-6 Hari Perniagaan melalui DHL, FedEx, dan UPS.
Penghantaran Ekspres: Penghantaran pada hari yang sama untuk pesanan dalam stok yang dibuat sebelum 2:00 PM (GMT+8).
Liputan Seluruh Dunia: Berkhidmat di lebih 150 negara, termasuk penghantaran pantas ke Arab Saudi dan UAE.

Pemulangan & Jaminan

Jaminan 30 Hari: Pemulangan diterima untuk produk dalam stok dalam pembungkusan asal yang disegel kilang.
Jaminan 12 Bulan: Setiap komponen industri disokong oleh jaminan teknikal profesional kami.

Pesanan diproses dan dihantar Isnin-Jumaat (tidak termasuk cuti umum).

Untuk kelayakan penuh, yuran penyimpanan semula, dan butiran pemulangan antarabangsa, sila lihat rasmi kami Polisi Pemulangan & Bayaran Balik .

TECHNICAL SPECIFICATIONS

Country of origin

BECKHOFF FC5121 CANopen Master/Slave Card