Siemens 6AV7727-2BC10-0AA0 SIMATIC Panel PC 670 Panel PC

Description

The Siemens 6AV7727-2BC10-0AA0 is a SIMATIC Panel PC 670 standard configuration designed for industrial human-machine interface (HMI) and control applications. This unit features a 15.1-inch color TFT touchscreen display with a NEMA4-rated front interface, suitable for deployment in demanding environments. It is equipped with an Intel Pentium III 1.26 GHz processor and 256 MB of SDRAM. For data storage, it includes a 40 GB EIDE hard disk drive and a DVD-ROM optical drive. This model is supplied without a pre-installed operating system, providing flexibility for custom software installations. The integrated power supply supports a voltage range of 115-230V AC.

Features

• 15.1-inch color TFT display with integrated touchscreen
• NEMA4 rated front interface for protection against dust and water spray
• Intel Pentium III processor operating at 1.26 GHz
• 256 MB SDRAM-133 system memory
• 40 GB EIDE internal hard disk drive
• Integrated DVD-ROM drive
• Wide-range power supply for 115-230V AC input

Applications

• Process visualization and control
• Machine-level data acquisition and logging
• Factory automation control panels
• Supervisory Control and Data Acquisition (SCADA) nodes

Technical Specifications

Installation Guidelines

1. 1
   Verify Panel Cutout: Confirm that the mounting cutout in the enclosure matches the required dimensions for the Panel PC 670 chassis. Ensure adequate clearance for ventilation and cable routing.
2. 2
   Mount the Unit: Insert the Panel PC into the prepared cutout from the front. Secure the unit from the rear using the provided mounting clamps, tightening them evenly to ensure a proper seal against the panel surface.
3. 3
   Connect Protective Earth (PE): Connect a low-impedance protective earth conductor to the designated PE terminal on the unit's chassis. This is critical for operator safety and EMI protection.
4. 4
   Connect Power Supply: Connect the 115-230V AC mains power using the provided cable to the power input connector. Ensure the source voltage is within the specified range.
5. 5
   Connect Peripherals: Connect all required interface cables, such as Ethernet, serial, and USB, to the appropriate ports on the rear of the unit.
6. 6
   System Power-Up: After verifying all connections, re-energize the main cabinet power. Power on the Panel PC and proceed with operating system and application software installation.