Siemens 6AV7893-0BH60-1BE0 SIMATIC IPC677C Panel PC

Description

The Siemens 6AV7893-0BH60-1BE0 is a SIMATIC IPC677C Panel PC designed for demanding HMI and control tasks in industrial environments. This unit features a 15-inch keypad display with 1024x768 resolution and is powered by an Intel Core i7-610E processor. It is equipped with 4 GB of DDR3 ECC memory, a 250 GB SATA hard drive, and an integrated DVD drive. For robust industrial communication, it includes dual Gigabit Ethernet ports and a dedicated PROFIBUS/MPI interface, compatible with CP 5611-A2. The system also provides onboard monitoring for watchdog, temperature, and fan status, along with an integrated RAID controller for data integrity.

Features

• Integrated Intel Core i7-610E dual-core processor.
• Onboard PROFIBUS/MPI communication port.
• System monitoring for watchdog, temperature, and fan speed.
• Built-in RAID controller for enhanced storage reliability.
• Front-panel USB 2.0 port for convenient access.
• Includes a DVD+/-R+/-RW optical drive.
• Pre-installed with Windows 7 Ultimate 64-bit operating system.

Applications

• Process visualization and SCADA systems.
• Machine-level data acquisition and control.
• Manufacturing Execution Systems (MES) terminals.
• Industrial automation and plant floor computing.

Technical Specifications

Installation Guidelines

1. 1 Verify that the panel cutout dimensions match the IPC677C specifications. Ensure the mounting surface is flat, clean, and capable of supporting the unit's weight.
2. 2 Insert the Panel PC into the cutout from the front. Secure it from the rear using all provided mounting clamps, tightening them evenly to the manufacturer's recommended torque to ensure a proper seal.
3. 3 Connect a low-impedance protective earth (PE) conductor to the designated grounding terminal on the chassis. This connection is critical for safety and noise immunity.
4. 4 Connect the AC power supply cable, ensuring the source voltage matches the 110/230 V AC rating. Connect all communication cables (Ethernet, PROFIBUS, USB, Serial) as required, ensuring proper shielding and strain relief.
5. 5 After verifying all connections are secure and correct, remove the lockout/tagout device and restore power to the unit. Observe the boot sequence to confirm proper system startup.