Siemens 6AV7613-0AA10-0AE0 SIMATIC Panel PC 670 Panel PC

Description

This is a SIMATIC Panel PC 670, part number 6AV7613-0AA10-0AE0, designed for industrial human-machine interface (HMI) and control applications. This unit features a 12-inch TFT display and is powered by a 300 MHz Celeron CPU. The standard configuration includes 64 MB of RAM, a 20 GB hard drive, and operates on a 24V DC power supply. This specific model comes pre-installed with a German-language version of the Windows 98 operating system. As a legacy component, this Panel PC is suitable for maintaining or repairing existing systems that rely on this specific hardware and software configuration.

Features

• 12-inch TFT color display for process visualization.
• Intel Celeron processor operating at 300 MHz.
• Equipped with 64 MB RAM and a 20 GB hard disk drive.
• Operates on a nominal 24V DC industrial power source.
• Pre-loaded with Windows 98 (German language version).
• Robust construction for panel mounting in industrial environments.

Applications

• Machine-level operator control and monitoring.
• Supervisory Control and Data Acquisition (SCADA) nodes.
• Data logging and recipe management systems.
• Direct replacement for identical obsolete units in existing production lines.

Technical Specifications

Installation Guidelines

1. 1 De-energize Equipment: Before installation, ensure all related machinery and control cabinet power sources are de-energized and locked-out/tagged-out (LOTO) according to site safety procedures. Verify the absence of voltage.
2. 2 Panel Mounting: Prepare the control panel cutout according to the manufacturer's dimensional drawings. Secure the Panel PC into the cutout using all provided mounting clamps, tightening them evenly to ensure a proper seal and prevent chassis warping.
3. 3 Power Connection: Connect a stable, correctly rated 24V DC power supply to the designated power input terminals. Ensure correct polarity is observed. Use appropriately sized wiring for the load and distance from the power supply.
4. 4 Grounding: Connect the chassis ground terminal to the control cabinet's main protective earth (PE) busbar using a low-impedance conductor. A proper ground connection is essential for operator safety and noise immunity.
5. 5 Ventilation: Ensure adequate clearance around the unit's ventilation openings as specified by the manufacturer. Do not block airflow, as overheating can lead to performance degradation and premature failure.