The BECKHOFF BK9000 is an Ethernet TCP/IP Bus Coupler designed to link physical Beckhoff Bus Terminals (K-bus system) to industrial Ethernet networks. Operating as an I/O device, the coupler manages communication between the master controller and modular digital or analog peripheral terminals, converting the fieldbus signals into the internal, terminal-independent K-bus representation.
This coupler supports automatic transmission rate recognition of 10/100 Mbit/s, facilitating simple integration into existing network topologies. System configuration and parameterization are managed via the Beckhoff KS2000 configuration software, which can connect through the Ethernet port or the integrated serial interface. The unit features an integrated power supply designed to power both the coupler electronics and the connected K-bus terminals.
Designed for compact control cabinet mounting, the BECKHOFF BK9000 provides direct connection for up to 64 Bus Terminals, and can be extended further using K-bus extension terminals. It features standard RJ45 networking hardware, mechanical rail mounting, and status LEDs for network diagnostics, power status, and terminal bus integrity.
| Parameter | Specification |
|---|---|
| Manufacturer | BECKHOFF |
| Model | BK9000 |
| Product Type | Ethernet TCP/IP Bus Coupler |
| Number of Bus Terminals | 64 (up to 255 with K-bus extension) |
| Max. Fieldbus I/O Capacity | 512 bytes input / 512 bytes output |
| Configuration Interface | KS2000 configuration software |
| Supported Protocols | TwinCAT ADS, Modbus TCP, Beckhoff Real-Time Ethernet |
| Data Transfer Rates | 10/100 Mbit/s, automatic recognition |
| Bus Connection Interface | 1 x RJ45 |
| Transmission Medium | Category 3 (10 Mbit/s) or Category 5 (100 Mbit/s) UTP/STP copper cable |
| Power Supply Input Voltage | 24 V DC (-15% / +20%) |
| Input Current | 70 mA + (total K-bus current)/4, maximum 500 mA |
| Starting Current | 2.5 times continuous current |
| Recommended Protective Fuse | Less than or equal to 10 A |
| Current Supply K-Bus | 1750 mA |
| Power Contacts Rating | 24 V DC / maximum 10 A |
| Electrical Isolation | 500 V (power contact / supply voltage / fieldbus) |
| Operating Temperature | -25 to +60 Celsius |
| Storage Temperature | -40 to +85 Celsius |
| Relative Humidity | 95%, non-condensing |
| Protection Rating | IP20 |
| Weight | Approximately 170 g |
| Interface / Terminal | Function |
|---|---|
| RJ45 Socket | 10/100 Mbit/s Ethernet network connection |
| PE Contact | Functional earth connection point |
| Power Supply Terminals | 24 V DC system supply input |
| Power Contacts | Blade terminal feed for field-side potential distribution |
| K-Bus Interface | Internal connection contacts to adjacent Bus Terminals |
When replacing a BECKHOFF BK9000 coupler, document the existing terminal ordering layout and note the exact configuration parameters, IP address settings, or subnet masks stored in the system. Ensure all power supplies are isolated before sliding terminals away from the old coupler. Set the same hardware configurations, node addresses, or software-defined parameters on the replacement unit before powering the K-bus assembly.
Global Express Shipping
Returns & Warranty
Manufacturer: BECKHOFF
Product No.: BK9000
Country of origin:Germany
Product Type: Ethernet Bus Couplers
Payment: T/T, Western Union
Weight: 170g
Shipping port: Xiamen
Warranty: 12 months
The BECKHOFF BK9000 is an Ethernet TCP/IP Bus Coupler designed to link physical Beckhoff Bus Terminals (K-bus system) to industrial Ethernet networks. Operating as an I/O device, the coupler manages communication between the master controller and modular digital or analog peripheral terminals, converting the fieldbus signals into the internal, terminal-independent K-bus representation.
This coupler supports automatic transmission rate recognition of 10/100 Mbit/s, facilitating simple integration into existing network topologies. System configuration and parameterization are managed via the Beckhoff KS2000 configuration software, which can connect through the Ethernet port or the integrated serial interface. The unit features an integrated power supply designed to power both the coupler electronics and the connected K-bus terminals.
Designed for compact control cabinet mounting, the BECKHOFF BK9000 provides direct connection for up to 64 Bus Terminals, and can be extended further using K-bus extension terminals. It features standard RJ45 networking hardware, mechanical rail mounting, and status LEDs for network diagnostics, power status, and terminal bus integrity.
| Parameter | Specification |
|---|---|
| Manufacturer | BECKHOFF |
| Model | BK9000 |
| Product Type | Ethernet TCP/IP Bus Coupler |
| Number of Bus Terminals | 64 (up to 255 with K-bus extension) |
| Max. Fieldbus I/O Capacity | 512 bytes input / 512 bytes output |
| Configuration Interface | KS2000 configuration software |
| Supported Protocols | TwinCAT ADS, Modbus TCP, Beckhoff Real-Time Ethernet |
| Data Transfer Rates | 10/100 Mbit/s, automatic recognition |
| Bus Connection Interface | 1 x RJ45 |
| Transmission Medium | Category 3 (10 Mbit/s) or Category 5 (100 Mbit/s) UTP/STP copper cable |
| Power Supply Input Voltage | 24 V DC (-15% / +20%) |
| Input Current | 70 mA + (total K-bus current)/4, maximum 500 mA |
| Starting Current | 2.5 times continuous current |
| Recommended Protective Fuse | Less than or equal to 10 A |
| Current Supply K-Bus | 1750 mA |
| Power Contacts Rating | 24 V DC / maximum 10 A |
| Electrical Isolation | 500 V (power contact / supply voltage / fieldbus) |
| Operating Temperature | -25 to +60 Celsius |
| Storage Temperature | -40 to +85 Celsius |
| Relative Humidity | 95%, non-condensing |
| Protection Rating | IP20 |
| Weight | Approximately 170 g |
| Interface / Terminal | Function |
|---|---|
| RJ45 Socket | 10/100 Mbit/s Ethernet network connection |
| PE Contact | Functional earth connection point |
| Power Supply Terminals | 24 V DC system supply input |
| Power Contacts | Blade terminal feed for field-side potential distribution |
| K-Bus Interface | Internal connection contacts to adjacent Bus Terminals |
When replacing a BECKHOFF BK9000 coupler, document the existing terminal ordering layout and note the exact configuration parameters, IP address settings, or subnet masks stored in the system. Ensure all power supplies are isolated before sliding terminals away from the old coupler. Set the same hardware configurations, node addresses, or software-defined parameters on the replacement unit before powering the K-bus assembly.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
Germany
|
Replacing a 1756-L73 does not automatically mean upgrading its firmware. This guide compares v19.013, v21.011 and v31.011, focusing on project compatibility, HMI communications, legacy networks and...
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
