Manufacturer: BECKHOFF
Product No.: CP6511-0001-0080
Country of origin:Germany
Product Type: Built-in Panel PCs
Payment: T/T, Western Union
Weight: 500g
Shipping port: Xiamen
Warranty: 12 months
Engineered to deliver high-reliability operator interface performance in challenging industrial environments, the Beckhoff CP6511-0001-0080 features a rugged 12-inch TFT display with an 800 x 600 pixel resolution. This built-in industrial panel PC integrates core computing capability directly behind the visualization interface, optimizing control cabinet footprint and simplifying Fieldbus communication integration.
| Parameter | Specification |
|---|---|
| Manufacturer | Beckhoff |
| Model Number | CP6511-0001-0080 |
| Display Size | 12-inch |
| Resolution | 800 x 600 pixels |
| Front Protection Class | IP65 |
| Rear Protection Class | IP20 |
| Operating Temperature Range | 0 to 55 degC |
| Country of Origin | Germany |
| Shipping Weight (Calculated) | 8.0 kg |
Based on extensive field deployment logs of the Beckhoff CP65xx range, our engineering team has compiled critical optimization guidelines:
The CP6511-0001-0080 is fully backward compatible with legacy CP6511 physical cutouts, allowing effortless drop-in replacements. Note that software dependencies on specific TwinCAT revisions may apply if utilizing specific on-board motherboard configurations.
To prevent early aging of the display backlight array, ensure the active display screen timeout is configured correctly in the OS. Avoid mounting the unit directly above major heat sources like heavy-duty motor drives without active cooling baffles.
Use a dedicated, noise-isolated 24V DC power feed for the display unit. Ensure the mounting panel cutout edges are completely deburred to maintain the integrity of the front IP65 sealing gasket upon torque application.
CRITICAL SAFETY WARNING
Before physical installation or electrical termination, ensure all main and control power circuits are completely de-energized and locked out. Verify that no residual voltages are present on the cabinet terminal blocks.
Prepare a precise control cabinet cutout matching the specific dimensional specifications of the 12-inch panel PC frame.
Carefully insert the panel PC through the cutout from the front side, ensuring the pre-installed sealing gasket sits flush and uniform against the exterior mounting surface.
Access the device from the rear and engage the integrated pull-out clamping levers to lock the unit securely into place against the cabinet wall.
Terminate power lines and interface cables, ensuring clean cable management and adequate strain relief.
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
Germany
|
Check 1771-IG TTL HIGH/LOW logic thresholds, field supply ripple and 1771-WC wiring before replacing an input module.
A field checklist for distinguishing Danfoss 060G2105, 060G1323 and 060G2109 by pressure range, fitting, loop signal and controller scaling.
A field checklist for separating 24 VDC input, carrier bus, output derating and alarm-contact faults before replacing an Emerson SE5009.
A controlled commissioning method for using the 140XSM00200 simulator to verify Modicon Quantum input mapping and interlocks before reconnecting field wiring.
A commissioning checklist for the ProSoft PLX32-EIP-MBTCP covering subnet separation, register contracts, EtherNet/IP timing, failure tests and replacement records.
A field checklist for IC693MDL916 relay commands, terminal blocks, load current, switching rate and contact-side measurements.
