Description

The BECKHOFF CP6602-0001-0020 is a compact, built-in Panel PC engineered for space-saving control cabinet visualization and automated control tasks. Combining human-machine interface (HMI) functions with an integrated PC controller, this unit leverages an ARM Cortex-A8 processor to deliver energy-efficient performance for localized monitoring and task management in TwinCAT-driven environments.

Constructed with an aluminum front bezel and a sheet-steel rear cover, the BECKHOFF CP6602-0001-0020 features a 5.7-inch TFT display equipped with a resistive touch screen. Designed specifically for integration into control cabinet doors or console housings, it provides high front-side protection against industrial contaminants while maintaining a compact physical footprint.

This controller features onboard communication interfaces including an Ethernet port, an EtherCAT interface, and dual USB ports, facilitating convenient peripheral connectivity. For critical data retention during supply interruptions, it includes a built-in 1-second uninterruptible power supply (UPS) paired with non-volatile memory (NOVRAM), ensuring system state recovery and localized data integrity.

Features

• Efficient ARM Cortex-A8 processor running at 1 GHz
• 5.7-inch active matrix TFT display with 640 x 480 resolution
• Analog resistive touch screen for industrial touch control
• Integrated interfaces: 1 x Ethernet, 1 x EtherCAT, 2 x USB 2.0, and 1 x RS232
• MicroSD card slot for flash storage up to 16 GB capacity
• 128 kByte NOVRAM for non-volatile storage of persistent machine variables
• Built-in 1-second UPS to safeguard data in the event of unexpected power loss
• Secure pull-out clamping levers for simplified cabinet installation

Applications

• Control cabinet HMI applications and operator interface systems
• Localized machine control, processing, and system visualization
• Compact EtherCAT-based system management and signal communication terminals
• Dedicated data logging and diagnostic displays in manufacturing plants

Technical Specifications

Connections / Interfaces

Installation Guidelines

1. Ensure that all power supply systems are fully de-energized before mounting the device.
2. Inspect the panel mounting cutout to verify dimensions align with the specifications of the 5.7-inch Panel PC.
3. Insert the device from the front into the prepared cutout.
4. Tighten the pull-out clamping levers securely from the rear of the panel cutout to seal the IP65 front gasket against the mounting wall.
5. Connect the primary 24 V DC power supply cord to the power terminals, ensuring correct terminal polarity.
6. Attach the required network and communications interfaces (Ethernet, EtherCAT, and USB cables) to their respective RJ45 and peripheral ports.
7. Verify shielding integrity and ground connections before turning on the primary power supply.

Replacement Recommendations

When replacing a legacy BECKHOFF CP6602-0001-0020, verify that the existing microSD card is fully backed up or transferred to the new unit to preserve the running application, license data, and local configuration. Ensure that any persistent memory (NOVRAM) registers needed for proper startup are successfully saved and restored during the hot-swap or replacement sequence.