Bently Nevada 16710-17 Interconnect Cable

Description

The 16710-17 is a 3-conductor shielded 22 AWG (0.5 mm2) armored interconnect cable designed for use with Bently Nevada 330400 and 330425 accelerometers. This specific configuration provides a cable length of 17 ft (5.0 m) to support secure signal transmission in critical machinery monitoring applications.

Each cable assembly features a 3-socket plug at one end for connection to the accelerometer and terminal lugs at the other end for integration into the monitoring system or junction box. The armored construction provides increased mechanical protection against abrasion and environmental hazards, making it suitable for industrial settings where physical cable protection is required. This cable ensures integrity for casing acceleration measurements, including gear mesh and vibration monitoring.

Features

• 17 ft (5.0 m) total length
• 3-conductor shielded 22 AWG (0.5 mm2) construction
• Armored cable design for enhanced mechanical protection
• 3-socket plug connector at sensor end
• Terminal lugs for easy termination at monitor end
• Compatible with 330400 and 330425 series accelerometers

Applications

• Casing vibration and acceleration monitoring
• Gear mesh monitoring
• Critical machinery protection
• Industrial environments requiring armored cable protection

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the cable is routed away from high-voltage lines to prevent electromagnetic interference. When installing in hazardous areas, verify that the entire loop, including the sensor and associated interface module, meets the intrinsic safety requirements for the specific installation zone. Use the standard 3-pin MIL-C-5015 connection interface on the accelerometer. Proper grounding of the shield is essential to maintain signal integrity.