Bently Nevada 16925-25 330400 Interconnect Cable

Description

16925-25 is a 3-conductor shielded 22 AWG (0.5 mm2) interconnect cable for Bently Nevada 330400 and 330425 accelerometer systems. This configuration features a 25 ft (7.6 m) cable length, equipped with a 3-socket plug at the sensor end and terminal lugs at the monitoring system end. This cable is used to connect the accelerometer to the monitoring instrumentation, ensuring reliable signal transmission for critical machinery casing vibration measurements. The 22 AWG construction provides durability for industrial environments, while the shielded design helps protect against electromagnetic interference.

Features

• 3-conductor shielded cable, 22 AWG (0.5 mm2)
• 3-socket plug connector at sensor interface
• Terminal lug termination for instrument connection
• 25 ft (7.6 m) total cable length
• Compatible with 330400 and 330425 acceleration transducers

Applications

• Casing vibration monitoring for critical machinery
• Gear mesh monitoring
• Rotating machinery protection
• General purpose industrial acceleration measurement

Ordering Information

Orderable Part Number	16925-25	330400 Interconnect Cable
A - Cable Length	25	25 ft (7.6 m)

Technical Specifications

Manufacturer	Bently Nevada
Part Number	16925-25
Cable Type	3-conductor shielded 22 AWG (0.5 mm2)
Connector (Sensor End)	3-socket plug
Connector (System End)	Terminal lugs
Cable Length	25 ft (7.6 m)
Minimum Bend Radius	Not specified
Operating Temperature	Consult system documentation for sensor compatibility

Installation Guidelines

• Ensure the mating connector is properly seated to maintain IP-rated connections where required.
• Route cables in protected conduit to prevent physical damage and minimize electromagnetic interference.
• Avoid sharp bends or kinks in the cable during installation to maintain shielding integrity.
• Connect terminal lugs securely to the monitoring system input terminals.