Bently Nevada 330103-02-04-30-01-00 3300 XL 8 mm Proximity Probe

Description

330103-02-04-30-01-00: 3300 XL 8 mm proximity probe, M10 x 1 thread, with 0.2 in unthreaded length (Option 02), 0.4 in case length (Option 04), 3.0 m total length (Option 30), standard cable with connector protector (Option 01), and no hazardous area approvals (Option 00). This probe serves as a non-contact eddy-current displacement sensor for shaft vibration and axial position measurement in 3300 XL 8 mm monitoring chains.

The 330103 configuration is built for metric-threaded applications, providing reliable data for critical rotating machinery such as turbines, compressors, and pumps. This variant features a standard cable and is compatible with 3300 XL Proximitor sensors and extension cables. The system is designed for continuous duty in industrial environments where precision shaft monitoring is required.

Features

• M10 x 1 threaded probe body
• 0.2 in unthreaded length (Option 02)
• 0.4 in case length (Option 04)
• 3.0 m total system length (Option 30)
• Miniature coaxial ClickLoc connector with connector protector (Option 01)
• Standard coaxial cable type
• Non-contact eddy-current displacement sensing
• Compatible with 3300 XL Proximitor sensors and extension cables

Applications

• Turbine and compressor shaft vibration monitoring
• Rotor axial position measurement
• Critical rotating machinery protection on 8 mm probe systems
• Industrial fluid-film bearing monitoring

Ordering Information

Technical Specifications

Installation Guidelines

• Ensure the probe is gapped according to the 3300 XL monitoring system manual (141078).
• Use the appropriate mounting bracket (M10 thread compatible) and tighten according to torque specifications to prevent loosening due to machine vibration.
• Ensure the Proximitor sensor is installed in an environment with protection of at least IP54 if applicable.
• Check that extension cable length and probe length combined equal the total length for which the Proximitor sensor is calibrated.

Compliance and Certifications

Complies with FCC standards. For hazardous area applications, ensure your installation matches the required certification drawings if using an agency-approved variant (this SKU is Option 00/Not required).