Bently Nevada 330130-030-00-00 3300 XL Standard Extension Cable

Description

The 330130-030-00-00 is a 3.0 meter standard extension cable designed for use in 3300 XL 8 mm proximity transducer systems. This component serves as the vital link between the 3300 XL 8 mm proximity probe and the 3300 XL Proximitor sensor, ensuring the transmission of eddy-current displacement signals for critical machinery monitoring applications. The configuration consists of a standard coaxial cable (Option 00) with a total length of 3.0 meters (Option 030) and does not require special agency approvals (Option 00).

The extension cable features Bently Nevada’s proprietary ClickLoc connectors, which provide reliable mechanical and electrical connection security. When installing this cable, verify that the total length of the extension cable plus the probe length matches the system requirements of the associated Proximitor sensor. Proper installation and connection are essential for maintaining the accurate shaft vibration and axial position measurements required for protection of turbines, compressors, and other rotating equipment.

Features

• 3.0 meter (9.8 feet) cable length provides flexibility for standard installation distances in machinery monitoring.
• Standard cable configuration (Option 00) for general-purpose environments without specialized armor or fluid-resistant requirements.
• Equipped with miniature coaxial ClickLoc connectors for secure, reliable signal integrity.
• Fully compatible with 3300 XL 8 mm proximity probes and 3300 XL Proximitor sensors.
• Designed for consistent signal transmission in 3300 XL monitoring chains.

Applications

• Turbine and compressor shaft vibration monitoring.
• Axial position and rotor displacement measurements.
• Critical rotating machinery protection in power generation, oil and gas, and petrochemical industries.
• Integration into existing 3300 XL 8 mm eddy-current transducer systems.

Ordering Information

Technical Specifications

Installation Guidelines

Ensure all connections are clean and fully seated using the ClickLoc connector mechanism to prevent signal loss or interference. The cable should be routed away from high-voltage lines or sources of electromagnetic interference to maintain measurement accuracy. Do not exceed the minimum bend radius of the cable during installation. For hazardous area applications, ensure that the chosen cable and system components meet local certification requirements.