Manufacturer: Bently Nevada
Product No.: 3300/16-02-01-01-01-00-00
Country of origin:United States
Product Type: XY/GAP Dual Vibration Monitor
Payment: T/T, Western Union
Weight: 1000g
Shipping port: Xiamen
Warranty: 12 months
The Bently Nevada 3300/16-02-01-01-01-00-00 is an XY/GAP Dual Vibration Monitor designed for two-channel radial vibration and shaft position monitoring in Bently Nevada 3300 systems.
The monitor accepts two proximity probe and Proximitor Sensor inputs. This configuration uses a 0 to 5 mil peak-to-peak vibration range and is designed for 3300 8 mm, 3300 XL 8 mm, or 7200 5 mm and 8 mm Proximitor Sensors with a 200 mV/mil scale factor.
The unit provides independent vibration measurement for Channel A and Channel B. Probe gap is also monitored to indicate average shaft position relative to the proximity probes.
This configuration includes an epoxy-sealed alarm relay, CSA/NRTL/C agency approval, no safety barriers, and no Trip Multiply option.
Two independent radial vibration channels
Average shaft position and probe gap monitoring
0 to 5 mil peak-to-peak full-scale vibration range
200 mV/mil transducer sensitivity
Compatible with 3300 8 mm Proximitor Sensors
Compatible with 3300 XL 8 mm Proximitor Sensors
Compatible with 7200 5 mm and 8 mm Proximitor Sensors
Independent Alert and Danger alarm functions
Gap Alert capability for both channels
Epoxy-sealed alarm relay configuration
Individual recorder outputs for both channels
Front and rear buffered transducer outputs
CSA/NRTL/C approval configuration
No safety barrier option
No Trip Multiply option
Radial shaft vibration monitoring
Shaft position and probe gap monitoring
Rotating machinery protection
Dual-channel proximity probe monitoring
Machinery condition monitoring using 3300 proximity systems
Replacement of matching 3300/16 XY/GAP monitor configurations
| Option | Configuration |
|---|---|
| Model | 3300/16 XY/GAP Dual Vibration Monitor |
| A: Full-scale Range | 02 - 0 to 5 mils peak-to-peak |
| B: Transducer Input | 01 - 3300 8 mm, 3300 XL 8 mm, or 7200 5 mm and 8 mm Proximitor Sensor |
| Transducer Sensitivity | 200 mV/mil |
| C: Alarm Relay | 01 - Epoxy-sealed |
| D: Agency Approval | 01 - CSA/NRTL/C |
| E: Safety Barrier | 00 - None |
| F: Trip Multiply | 00 - None |
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Model | 3300/16-02-01-01-01-00-00 |
| Product Type | XY/GAP Dual Vibration Monitor |
| System | 3300 |
| Number of Channels | 2 |
| Measurement Functions | Radial vibration and average shaft position |
| Signal Inputs | One or two proximity probe signals |
| Input Impedance | 10 kohm |
| Sensitivity | 200 mV/mil |
| Full-scale Range | 0 to 5 mil peak-to-peak |
| Power Consumption | 2 W nominal |
| Alarm Relay | Epoxy-sealed |
| Agency Approval | CSA/NRTL/C |
| Safety Barrier | None |
| Trip Multiply | None |
| Rack Space | 1 rack position |
| Weight | 1 kg (2.2 lb) |
| Parameter | Specification |
|---|---|
| Accuracy at +25 degC | +/-0.33% of full-scale typical |
| Maximum Accuracy Error | +/-1% |
| Frequency Response Option | 4 to 4,000 Hz or 1 to 600 Hz |
| Alarm Setpoint Range | 0 to 100% of full-scale |
| Alarm Repeatability | Within +/-0.39% of full-scale |
| Gap Alarm Delay | 6 seconds |
| Parameter | Specification |
|---|---|
| Available Output 1 | +4 to +20 mA |
| Available Output 2 | 0 to -10 Vdc |
| Available Output 3 | +1 to +5 Vdc |
| Outputs per Channel | 1 individual recorder output |
| Voltage Output Impedance | 100 ohm |
| Minimum Load Resistance | 10 kohm |
| 4-20 mA Load Resistance | 0 to 600 ohm |
| Parameter | Specification |
|---|---|
| Front Output | One coaxial connector per channel |
| Rear Output | One terminal connection per channel |
| Protection | Short-circuit protected |
| Output Impedance | 100 ohm |
| Parameter | Specification |
|---|---|
| Operating Temperature | 0 to +65 degC |
| Storage Temperature | -40 to +85 degC |
| Relative Humidity | Up to 95%, non-condensing |
Verify the complete catalog number before replacing the installed monitor.
Confirm the existing proximity system uses a 200 mV/mil transducer configuration.
Verify compatibility with the installed 3300 8 mm, 3300 XL 8 mm, or 7200 5 mm and 8 mm system.
Record existing Alert, Danger, gap, recorder-output, and bypass settings before removal.
Confirm the rack alarm state before removing or installing the monitor.
Verify Channel A and Channel B probe signals after installation.
Check vibration, gap, Alert, Danger, and recorder outputs before returning the rack to service.
Match the complete 3300/16-02-01-01-01-00-00 configuration when sourcing a replacement.
Do not substitute another 3300/16 solely because the front panel appears identical.
Full-scale range, transducer input, relay option, agency approval, safety barrier, and Trip Multiply options must be checked.
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
A direct comparison of 1746-OA8 and 1746-OA16 output count, common grouping, backplane current and temperature-derated load limits.
A field checklist for recording the 1761-NET-DNI hardware series, firmware, EDS file, DF1 settings, DeviceNet address and messaging configuration before replacement.
The EL3062 is a 0–10 V EtherCAT terminal. The EL3062-0030 is a 0–30 V variant. This checklist covers identification, scaling and commissioning.
A field checklist for replacing Allen-Bradley 1769-OW8 relay output modules without losing load-group, wiring, and commissioning details.
A field checklist for matching PLC digital and analog I/O to sensors, loads, commons, isolation groups, filters, and replacement settings.
A field-focused checklist for selecting, installing, commissioning, and diagnosing magnetic flowmeters, with emphasis on conductivity, full-pipe conditions, grounding, wiring, zero checks, and PLC...
