Bently Nevada 330104-00-15-10-02-00 3300 XL 8 mm Proximity Probe

Description

The 330104-00-15-10-02-00 is an 8 mm proximity probe from the Bently Nevada 3300 XL series, featuring an M10 x 1 thread with integrated armor (Option 00 for unthreaded length, Option 15 for 150 mm case length). This probe is designed for non-contact eddy-current displacement measurement within 3300 XL monitoring chains, providing precise shaft vibration and axial position data for critical rotating machinery. The configuration includes a 1.0 m system length (Option 10) and a miniature ClickLoc connector with standard cable (Option 02), with no hazardous area approvals (Option 00).

This probe is part of the 3300 XL 8 mm transducer system, which requires a matched Proximitor sensor and extension cable to maintain the specified system length and calibration accuracy. The integrated armor provides mechanical protection for the cable in industrial environments, while the M10 x 1 metric thread facilitates installation in standard metric-threaded housings. This unit is intended for use in diverse applications including turbines, compressors, and large rotating equipment where reliable, non-contact measurement of shaft dynamics is essential.

Features

• M10 x 1 thread with stainless steel armor for mechanical protection
• Option 00: 0.0 mm unthreaded length
• Option 15: 150 mm case length
• Option 10: 1.0 m total system length
• Option 02: Miniature ClickLoc coaxial connector with standard cable
• Option 00: No hazardous area agency approvals
• Compatible with 3300 XL Proximitor sensors and extension cables

Applications

• Turbine and compressor shaft vibration monitoring
• Rotor axial position measurement
• Critical rotating machinery protection
• General purpose industrial displacement sensing

Ordering Information

Technical Specifications

Installation Guidelines

• Ensure the probe is installed in a rigid, vibration-resistant mounting location.
• Maintain the specified gap between the probe tip and the target surface as defined by the 3300 XL system calibration.
• Use appropriate brackets for M10 x 1 metric threads to ensure stable positioning.
• Route cables away from high-voltage lines and sources of electromagnetic interference to prevent signal degradation.
• Ensure all connectors are fully seated and free of contaminants before final assembly.