Bently Nevada 330104-00-06-05-02-CN 3300 XL 8 mm Proximity Probe

Description

The 330104-00-06-05-02-CN is an 8 mm proximity probe belonging to the 3300 XL series, specifically configured as an M10 x 1 threaded probe with armor. This component is designed for critical machinery protection, enabling non-contact measurement of shaft vibration and axial position. As a component of the 3300 XL 8 mm transducer system, it provides high-linearity output for monitoring radial vibration and thrust position on turbines, compressors, and pumps.

This specific configuration features a 0 mm unthreaded length (Option 00) and a 60 mm case length (Option 06). It includes a 0.5 meter total system length (Option 05) and uses a standard miniature ClickLoc coaxial connector (Option 02) with integrated armor for enhanced mechanical durability. The -CN suffix indicates that this unit includes the China hazardous area approval package, certifying it for use in regulated environments requiring NEPSI and CCC compliance.

Features

• 3300 XL Series: Compatible with 3300 XL 5 mm and 8 mm Proximitor sensors and extension cables.
• Mechanical Construction: M10 x 1 threaded probe body with integrated armor for cable protection in harsh industrial environments.
• ClickLoc Connector: Miniature coaxial connector designed for secure, reliable connection within the transducer chain.
• Length Specifications: 0 mm unthreaded length and 60 mm case length for precise installation.
• China Approval Package: Factory-certified with the -CN suffix for NEPSI and CCC hazardous area requirements.

Applications

• Hydrocarbon and chemical processing plants
• Steam and gas turbine monitoring
• Centrifugal and axial compressor vibration analysis
• Rotor position and axial thrust measurements
• Critical rotating equipment protection in hazardous areas

Ordering Information

Technical Specifications

Installation Guidelines

• Ensure the probe is gapped correctly according to the system manual for the specific machinery application.
• Avoid over-tightening the probe into the mounting bracket; use recommended torque specifications to prevent damage to the threads.
• Maintain proper cable routing and shielding to minimize electromagnetic interference (EMI).
• Ensure the armor is properly secured and not subjected to sharp bends or excessive stress during installation.
• For hazardous area installations, adhere to local regulations regarding intrinsic safety and barrier requirements associated with the -CN approval.

Compliance and Certifications

• CSA, ATEX, IECEx (Standard approval)
• NEPSI and CCC (via -CN suffix)