Bently Nevada 330103-00-10-10-02-00 3300 XL 8 mm Proximity Probe

Description

330103-00-10-10-02-00: 3300 XL 8 mm proximity probe with M10 x 1 threads, 0 mm unthreaded length (Option 00), 100 mm case length (Option 10), and 1.0 m total system length (Option 10). This eddy-current displacement transducer is engineered for non-contact shaft vibration and axial position measurements in critical rotating machinery. Designed to operate within the 3300 XL 8 mm proximity transducer system, this unit pairs with a matching 3300 XL Proximitor sensor and extension cable to maintain the required electrical calibration.

This configuration utilizes a standard miniature ClickLoc coaxial connector (Option 02) and is supplied without agency approvals (Option 00). The probe features an 8 mm tip diameter and is constructed without integral armor to suit installations where mechanical protection is not required. It functions as a primary sensor for monitoring shaft vibration, radial position, and axial thrust in industrial fluid-film bearing applications.

Features

• M10 x 1 probe thread size for metric mounting configurations.
• 8 mm probe tip diameter for standard radial and axial displacement monitoring.
• Miniature ClickLoc coaxial connector ensures reliable, secure coupling.
• Option 00 unthreaded length (0 mm) and Option 10 case length (100 mm) configuration.
• Standard coaxial cable interface compatible with 3300 XL series Proximitor sensors.
• Non-contact measurement principle eliminates mechanical wear and friction at the measurement point.

Applications

• Shaft vibration monitoring on turbines, compressors, and pumps.
• Axial position (thrust) measurement on rotating shafts.
• Fluid-film bearing condition monitoring.
• Reciprocating machinery, motors, and generators.

Ordering Information

Technical Specifications

Connections and Interfaces

Installation Guidelines

Ensure the probe is mounted using the correct thread pitch (M10 x 1) and that the probe tip has adequate clearance according to the required gap voltage settings. The probe should be installed in a location free from excessive physical vibration. Use standard probe mounting brackets for installation. Ensure the extension cable connection is tight and secured with the ClickLoc connector mechanism; environmental protection via connector protectors is recommended if the connection is exposed to moisture or oil.