Description
Designed specifically for energy-saving applications in air conditioning, heating, and water treatment systems, the VFD185CP43B-21 represents a high-efficiency variable frequency drive engineered for centrifugal fan and pump loads. This fan/pump vector control drive operates within the Delta CP2000 series, providing precise speed and torque management under varying flow requirements. By utilizing sensorless vector control (SVC) and auto-tuning modes, the module optimizes motor performance, reduces power consumption, and extends mechanical equipment life.
The unit features integrated PID control with feedback sleep and wake functions to regulate pressure and flow rates without requiring external controllers. Additionally, its hardware layout is optimized for wall-mount configurations in standard industrial enclosures, offering reliable thermal performance and robust electromagnetic compatibility in demanding motor control setups.
Features
- Advanced sensorless vector control (SVC) and V/F control curves designed for variable torque loads.
- Built-in PLC capacity up to 10k steps for decentralized process logic control.
- Integrated MODBUS protocol via RS-485 communication interface.
- Fire mode and bypass operations to maintain ventilation and fluid flow during emergency states.
- Energy-saving tuning algorithms that automatically adjust output voltage based on load conditions.
- Conformal coating on printed circuit boards (PCBs) to resist dust, moisture, and chemical corrosion.
Applications
- Commercial HVAC air handling units and cooling tower fans.
- Municipal water distribution and wastewater pumping stations.
- Industrial ventilation, exhaust, and blowers.
- Agricultural irrigation system flow control.
Technical Specifications
Manufacturer
| Delta Electronics |
Part Number/Model
| VFD185CP43B-21 |
Product Series
| CP2000 Series |
Applicable Motor Capacity
| 18.5 kW (22 HP) |
Input Voltage / Phase
| 460V AC, 3-Phase |
Rated Output Current
| 38 Amps |
Installation Type
| Wall Mount |
IP Protection Level
| IP20 |
NEMA Protection Level
| NEMA 1 |
Dimensions (W x H x D)
| 7.48 in x 12.60 in x 7.48 in |
Weight
| 6.0 kg |
Installation Guidelines
- Mount the drive vertically on a flat, non-flammable surface to facilitate natural convection.
- Maintain a minimum clearance of 50 mm on both sides and 120 mm above and below the unit for optimal airflow.
- Ensure the protective earth (PE) terminal is securely grounded to prevent electrical noise and safety hazards.
- Use shielded motor cables and route control wiring separately from high-voltage power cables to avoid electromagnetic interference.
Compliance and Certifications