Manufacturer: General Electric
Product No.: DS200DMCBG1AJE
Country of origin:United States
Product Type: Turbine Control Processor Boards
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 640g
Dimensions: 28 x 21.4 x 3.3 cm
Shipping port: Xiamen
Warranty: 12 months
The General Electric DS200DMCBG1AJE is a DOS DUP processor board manufactured for use in GE Speedtronic Mark V Turbine Control Systems and automated industrial drive assemblies. Operating within gas, steam, and wind turbine management architectures, the board provides dedicated microprocessor-driven calculation, data communication, and localized control logic execution.
As an updated revision of the Mark V DMCB processor series, the DS200DMCBG1AJE incorporates hardware revision ratings A, J, and E. The board provides three 26-pin ribbon connectors and a 40-pin interface header to route control and diagnostic signals to adjacent modules and distribution points. Hardware configuration is handled through 19 onboard jumper headers, while real-time operating status is displayed by two diagnostic LEDs.
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric |
| Part Number | DS200DMCBG1AJE |
| Platform | Speedtronic Mark V / EX2100 |
| Module Type | DOS DUP Processor Board |
| Functional Acronym | DMCB |
| Connectors | Three 26-pin connectors, One 40-pin connector |
| Hardware Jumpers | 19 onboard jumpers |
| Diagnostic Indicators | 2 LEDs (CR2, CR12) |
| Revision History | Revision AJE (Functional: A, J; Artwork: E) |
| PCB Coating | Standard / Normal coating |
| Dimensions | 28 x 21.4 x 3.3 cm |
| Net Weight | 0.64 kg |
| Country of Origin | United States |
Before handling or installing the DS200DMCBG1AJE, ensure that all electrical power to the drive assembly or Mark V panel is disconnected and locked out. Use appropriate electrostatic discharge (ESD) protection, including a grounded wrist strap, when handling the circuit board. Verify that all 19 configuration jumpers on the replacement DS200DMCBG1AJE match the exact layout of the original board before connecting ribbon cables and fastening the board to its mounting standoffs.
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Learn what derivative action contributes to a PID loop, why it can amplify measurement noise and setpoint changes, and how filtering, sampling, and staged tests make D tuning safer.
A practical guide to segmenting, documenting, and testing industrial Ethernet networks so plant teams can isolate faults quickly, control change, and expand without creating fragile dependencies.
Commission IO-Link systematically from master addressing and port modes through IODD selection, PLC byte mapping, parameter backups, device validation, and failure-injection tests.
A practical PowerFlex braking guide covering regenerative energy, resistor resistance and duty cycle, thermal protection, model-specific parameters, and measured commissioning tests.
An industrial joystick is only the first element in a safe motion command chain. This guide covers sensing choices, wiring, signal validation, PLC logic, restart behavior, and commissioning for...
PID tuning becomes safer when engineers can see how proportional, integral, and derivative actions reshape error, output, and response over time. This guide turns live trends into a disciplined...
