The General Electric IC630MDL304 is a dual-function combination input and output module designed for the Series Three PLC platform. This robust unit integrates 16 discrete input circuits and 16 discrete output circuits into a single module, optimizing panel space and system architecture. The input circuits are engineered to receive standard ON/OFF signals from user-supplied field devices such as limit switches, pushbuttons, and relay contacts. Simultaneously, the output circuits provide reliable control capabilities for various industrial loads, including motor starters, indicator lights, and relay coils.
Requiring an external 24 VDC power supply, the module accurately senses input states while supplying operational DC power to the output switching circuits. Field wiring is efficiently managed through a faceplate-mounted 36 screw-terminal connector, divided evenly into top input terminals and lower output terminals to simplify installation and maintenance.
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric |
| Product Series | Series Three |
| Catalog Number | IC630MDL304 |
| Module Type | Combination Input / Output Module |
| Number of Inputs | 16 discrete |
| Number of Outputs | 16 discrete |
| External Power Supply Voltage | 24 VDC (plus or minus 10 percent) |
| Input Current (Nominal) | 7 mA |
| Output Current (Max per point) | 0.5 Amps |
| Input ON Level / OFF Level | ON: <6.0 VDC | OFF: >18.0 VDC |
| Output Switching Capacity | 24 VDC at 0.5 Amps |
| Country of Origin | United States |
Field connections for the IC630MDL304 are established via a 36 screw-terminal connector integrated directly into the module faceplate. The terminal layout is divided into two distinct groups of 16 terminals: the upper 16 terminals are dedicated to the 16 input circuits, and the lower 16 terminals are assigned to the 16 output circuits. Each individual terminal accommodates a single No. 12 AWG wire or up to two No. 14 AWG wires, ensuring secure termination for heavy-duty industrial environments.
Ensure all external power supplies are disconnected before installing or removing the module from the Series Three base. Insert the module evenly into the designated I/O slot, ensuring proper backplane alignment before securing the unit. Keep in mind that as a 32-point I/O module, it consumes 32 consecutive I/O references corresponding to its assigned slot configuration. Maintain adequate spacing around the chassis to support thermal dissipation, especially when operating multiple output channels near maximum current capacity.
Global Express Shipping
Returns & Warranty
Manufacturer: General Electric
Product No.: IC630MDL304
Country of origin:United States
Product Type: PLC I/O Module
Payment: T/T, Western Union
Weight: 1000g
Shipping port: Xiamen
Warranty: 12 months
The General Electric IC630MDL304 is a dual-function combination input and output module designed for the Series Three PLC platform. This robust unit integrates 16 discrete input circuits and 16 discrete output circuits into a single module, optimizing panel space and system architecture. The input circuits are engineered to receive standard ON/OFF signals from user-supplied field devices such as limit switches, pushbuttons, and relay contacts. Simultaneously, the output circuits provide reliable control capabilities for various industrial loads, including motor starters, indicator lights, and relay coils.
Requiring an external 24 VDC power supply, the module accurately senses input states while supplying operational DC power to the output switching circuits. Field wiring is efficiently managed through a faceplate-mounted 36 screw-terminal connector, divided evenly into top input terminals and lower output terminals to simplify installation and maintenance.
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric |
| Product Series | Series Three |
| Catalog Number | IC630MDL304 |
| Module Type | Combination Input / Output Module |
| Number of Inputs | 16 discrete |
| Number of Outputs | 16 discrete |
| External Power Supply Voltage | 24 VDC (plus or minus 10 percent) |
| Input Current (Nominal) | 7 mA |
| Output Current (Max per point) | 0.5 Amps |
| Input ON Level / OFF Level | ON: <6.0 VDC | OFF: >18.0 VDC |
| Output Switching Capacity | 24 VDC at 0.5 Amps |
| Country of Origin | United States |
Field connections for the IC630MDL304 are established via a 36 screw-terminal connector integrated directly into the module faceplate. The terminal layout is divided into two distinct groups of 16 terminals: the upper 16 terminals are dedicated to the 16 input circuits, and the lower 16 terminals are assigned to the 16 output circuits. Each individual terminal accommodates a single No. 12 AWG wire or up to two No. 14 AWG wires, ensuring secure termination for heavy-duty industrial environments.
Ensure all external power supplies are disconnected before installing or removing the module from the Series Three base. Insert the module evenly into the designated I/O slot, ensuring proper backplane alignment before securing the unit. Keep in mind that as a 32-point I/O module, it consumes 32 consecutive I/O references corresponding to its assigned slot configuration. Maintain adequate spacing around the chassis to support thermal dissipation, especially when operating multiple output channels near maximum current capacity.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Input filtering can stabilize PLC data, but excessive smoothing delays alarms and masks process changes. Learn how to diagnose noise, select hardware or software filters, and validate response time.
SCR and PWM drives regulate brushed DC motors in different ways. This comparison covers torque quality, speed range, reversal, braking, electrical noise, thermal behavior, feedback, and retrofit...
Industrial inverters synthesize controllable AC from a DC bus through semiconductor switching and filtering. This guide explains H-bridges, PWM, harmonics, motor loads, protection, thermal limits,...
Force control lets a robot adapt to contact instead of following position alone. This guide compares sensing approaches, control modes, process limits, safety boundaries, commissioning tests, and...
Configurable sensors can perform window, latch, delay, and Boolean decisions before data reaches a PLC. The benefit is faster local behavior; the risk is hidden logic, weak diagnostics, and...
A stable Mitsubishi virtual commissioning setup requires more than matching addresses. This guide explains the GX Simulator–OPC–Factory I/O data path, namespace design, scan timing, validation, and...
