Manufacturer: General Electric
Product No.: IC660BBD120
Country of origin:United States
Product Type: Counter Module
Payment: T/T, Western Union
Weight: 1000g
Shipping port: Xiamen
Warranty: 12 months
The General Electric IC660BBD120 is a high-speed counter block designed for industrial automation applications requiring direct processing of rapid pulse signals up to 200 kHz. As part of the Genius I/O product line, this module performs high-speed counting, frequency measurement, and pulse evaluation independently without placing processing overhead on the main CPU.
The unit features 12 digital inputs and 4 solid-state outputs, alongside a dedicated +5 VDC output and a CMOS/TTL-compatible oscillator output. It supports flexible configuration options to operate as four identical independent 16-bit simple counters (Type A), two independent 24-bit counters (Type B), or one complex 24-bit differential counter (Type C). Direct I/O processing enables the block to sense incoming pulses, evaluate counts against programmable presets, and trigger outputs autonomously.
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric |
| Catalog Number / Model | IC660BBD120 |
| Product Type | Genius High-Speed Counter Block |
| Operating Voltage | 93V to 132VAC or 10V to 30VDC |
| Required Power | 60 mA typical (AC) / 200 mA typical, 300 mA max at 12V (DC) |
| Inputs | 12 configurable digital inputs (single-ended or differential) |
| Outputs | 4 solid-state DC outputs (0.5 A max per output) |
| Max Count Rate | 200 kHz (high-frequency filter selected) |
| Operating Temperature | 0 degC to 60 degC (32 degF to 140 degF) |
| Storage Temperature | -40 degC to 100 degC (-40 degF to 212 degF) |
| Humidity | 5% to 95% non-condensing |
| Country of Origin | United States |
Terminals 1 through 4 provide connections for the Genius serial communication bus, supporting shielded twisted-pair cabling and terminating resistors at bus ends. Terminals 5 through 46 are allocated for field wiring, accommodating power supplies, discrete sensor inputs, encoder signals, and output load connections depending on whether the block is configured for Type A, B, or C operation. A dedicated grounding screw ensures proper chassis and shield bonding.
The unit is classified as open equipment and must be housed inside an appropriate protective electrical enclosure with adequate ventilation clearance of at least 2 inches above and below the block. Secure the module using 8-32 mounting hardware with star washers to guarantee ground integrity. Connect the dedicated green ground screw directly to the system ground using a minimum AWG 12 wire lead.
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Engineering checks for the Allen-Bradley 5069-L330ERMS2: controller capacity, separate RTB kits, local I/O limits, network-node limits, and motion-axis count.
Checks to record before replacing ABB 3HNE 00006-1 DSQC 351: controller generation, X3/X5/X20/X21 wiring, DeviceNet settings, INTERBUS mapping, and LED states.
Compare the IC693CPU360 and IC693CPU364 by Ethernet interface, +5 VDC load, memory, rack limits, and replacement checks.
A field-first diagnostic sequence for 1756-OF4 analog output problems: channel mode, removable terminal block, scaling, and controlled electrical checks.
A direct comparison of 1746-OA8 and 1746-OA16 output count, common grouping, backplane current and temperature-derated load limits.
A field checklist for recording the 1761-NET-DNI hardware series, firmware, EDS file, DF1 settings, DeviceNet address and messaging configuration before replacement.
