Manufacturer: Mitsubishi Electric
Product No.: FX5-ENET
Country of origin:United States
Product Type: PLC Network Modules
Payment: T/T, Western Union
Weight: 1500g
Dimensions: 12.5 cm x 11.0 cm x 6.5 cm
Shipping port: Xiamen
Warranty: 12 months
Delivering expanded Ethernet connectivity to MELSEC iQ-F controllers, the Mitsubishi Electric FX5-ENET functions as a dedicated, high-performance network interface module. This module enables host PLCs to integrate seamlessly into complex plant-wide architectures by providing an independent Ethernet port that supports simultaneous multi-protocol communications. It allows industrial engineers to isolate network traffic by routing local HMI and supervisory SCADA systems through separate physical subnets, preventing data bottlenecks on the CPU's primary port. Designed for reliable data transmission, the module natively processes CC-Link IE Field Network Basic, SLMP (Seamless Message Protocol), and standard socket communication protocol configurations.
| Parameter | Specification Value |
|---|---|
| Manufacturer | Mitsubishi Electric |
| Model Number | FX5-ENET |
| Product Series | MELSEC iQ-F Series |
| Module Type | Ethernet Network Module |
| Data Transmission Rate | 100 Mbps / 10 Mbps (Auto-negotiation) |
| Communication Mode | Full-Duplex / Half-Duplex |
| Interface Type | RJ45 connector (1 port) |
| Maximum Cable Length | 100 meters (segment length) |
| Maximum Connections | 32 connections (total destination nodes) |
| Internal Power Consumption | 110 mA at 24 V DC (supplied from system bus) |
| Compatible Controllers | FX5U CPU, FX5UC CPU (requires bus conversion module) |
| Ambient Operating Temperature | 0 to 55 degC |
| Country of Origin | Japan |
| Shipping Weight (Calculated) | 0.35 kg |
| Package Dimensions (Calculated) | 12.5 cm x 11.0 cm x 6.5 cm |
While the base FX5U CPU contains an onboard RJ45 Ethernet port, the FX5-ENET is specifically applied when network security mandates physically separated subnets or when your project exceeds the base CPU's native connection limits. Note that when mounting the FX5-ENET to an ultra-compact FX5UC CPU, you must install an FX5-CNV-BUS or FX5-CNV-BUSC bus conversion module prior to attaching this network block.
When configuring CC-Link IE Field Network Basic, verify that the total cyclic transmission load does not saturate your network bandwidth. Because the FX5-ENET relies on the internal system bus for power, ensure that the total current draw of all connected extension modules does not exceed the remaining capacity of the 24 V DC service power supply integrated within the host CPU module.
To prevent high-frequency industrial noise from interrupting communication packets, always use double-shielded category 5e (STP) or higher Ethernet cabling. Ground the shield at the switch side, and confirm that the main PLC base unit is securely grounded to a Class D ground (grounding resistance of 100 ohms or less) via a dedicated, short copper grounding strap.
CRITICAL WARNING:
Always disconnect and isolate all external AC and DC power supplies feeding the PLC rack before mounting, demounting, or wiring the FX5-ENET module. Failure to de-energize the entire system may result in permanent electronic component degradation, processor fault-states, or unexpected machinery startup.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
SCADA sits above PLCs and RTUs: it acquires field data, alarms operators, and issues supervisory commands across plants and remote assets—without replacing local deterministic control.
A VFD turns fixed-frequency mains into controlled voltage and frequency so AC motors match real load—cutting pump and fan energy while tightening torque, soft-start, and braking behavior.
PLCs still run the plant floor: scan cycles, I/O, and IEC 61131-3 languages decide whether machines stay deterministic. Here is how controllers work, where they win, and where they strain.
Learning industrial automation now means mastering PLCs, networks, and protection systems—not just robots. This guide maps skills, pitfalls, and career paths for engineers entering control-heavy...
A practical guide to replacing aging Bailey Symphony operator stations running on OpenVMS Alpha. It compares Alpha emulation, OpenVMS x86 migration, OPC re-platforming, and phased ABB modernization.
Maintenance data connects work orders, sensor signals, asset history, costs, and technician knowledge. Used well, it improves planning, reliability, predictive maintenance, spare-parts control, and...
