Description
Designed to integrate CANopen fieldbus communication into Omron control architectures, the CJ1W-CORT21 operates as a high-performance CPU Bus Unit within the CJ Series PLC platform. This module enables seamless data exchange between CJ-series programmable controllers and standard CANopen network devices, including drives, sensors, and remote I/O systems.
The unit installs directly onto either a CPU Rack or an Expansion Rack, with support for up to 16 master/configurator units per PLC system depending on rack power constraints. Hardware-based configuration features, such as integrated front-panel rotary and DIP switches, allow for direct troubleshooting and commissioning without complex software intervention during basic setup.
Features
- Direct integration into Omron CJ-series CPU and Expansion Racks.
- Supports up to 16 units connected to a single PLC system.
- Rotary switch for simple, hardware-based hexadecimal unit number configuration (0 to F).
- Front-panel DIP switches for direct baud rate selection.
- Requires 11 to 25 VDC network power supply via the communications connector.
Applications
- Industrial factory automation networks
- Multi-axis motion control and drive integration
- Distributed packaging and material handling systems
- Assembly lines utilizing CANopen-compliant field devices
Technical Specifications
| Manufacturer |
Omron |
| Part Number / Model |
CJ1W-CORT21 |
| Series |
CJ Series |
| Unit Classification |
CPU Bus Unit |
| Applicable PLCs |
CJ1G, CJ1H, CJ1M, CJ2M, CJ2H |
| Mounting Position |
CPU Rack or Expansion Rack |
| Max Units per PLC System |
16 Units max. |
| Unit Number Allocation |
0 to F (configured via hexadecimal rotary switch) |
| Network Power Supply Voltage |
11 to 25 VDC (supplied via communications connector) |
| Baud Rate Configuration |
Digital front-panel DIP switch (3-position) |
| Influence on CPU Cycle Time |
0.3 ms + 0.0064 ms per allocated buffer |
| Shipping Weight |
2.0 kg |
Installation Guidelines
-
Power Isolation: Always isolate the PLC system power supply before mounting, wiring, or removing the CPU Bus Unit.
-
Address Configuration: Set the unique unit number (0 to F) using the hexadecimal rotary switch prior to installation to prevent addressing conflicts on the backplane bus.
-
Network Termination: Ensure proper termination resistors (typically 120 ohms) are installed at both physical ends of the CANopen network trunk line.
-
Shielding and Grounding: Connect the CAN network cable shield to ground at a single point to mitigate electromagnetic interference in high-noise environments.