Manufacturer: Omron
Product No.: CJ1W-DA042V
Country of origin:Japan
Product Type: Analog Output Modules
Payment: T/T, Western Union
Weight: 2000g
Shipping port: Xiamen
Warranty: 12 months
High-speed, high-accuracy analog control is delivered by the Omron CJ1W-DA042V, a specialized 4-channel analog output module engineered for the Omron CJ-Series PLC platform. This module converts digital values inside the PLC into analog voltage signals, providing high-speed direct conversion capabilities to interface with variable speed drives, actuators, control valves, and other analog field instruments.
Featuring individual channel configuration, the CJ1W-DA042V supports independent signal range selection for each of its four outputs. The system's ultra-fast conversion cycle, scaling down to 20 microseconds for a single point, makes it exceptionally suited for dynamic motion control and high-speed process modulation where real-time accuracy is critical.
| Manufacturer | Omron |
| Model/Part Number | CJ1W-DA042V |
| Series | CJ-Series / CJ1 |
| Module Type | Analog Output Unit (High-speed type) |
| Number of Outputs | 4 points |
| Signal Range (Resolution) |
1 to 5 V (1/10,000) 0 to 10 V (1/20,000) -10 to 10 V (1/40,000) |
| Conversion Period |
1 point: 20 us 2 points: 25 us 3 points: 30 us 4 points: 35 us (Direct conversion provided) |
| Accuracy (at 25 degC) | ±0.3% of F.S. |
| External Connection | Removable terminal block |
| Allocated Unit Numbers | 1 |
| Current Consumption | 0.40 A at 5 VDC |
| Shipping Weight | 2.0 kg |
Mounting: Securely mount the module onto the CJ-series CPU rack or expansion rack. Ensure the locking levers at the top and bottom of the unit are fully engaged to guarantee proper connection to the backplane.
Wiring: Use shielded twisted-pair cables for analog output connections to minimize electromagnetic interference. Route signal lines away from high-voltage power cables or motor lines.
Grounding: Connect the shield wire of the output cables to the ground terminal of the PLC system or control panel. Ensure a single-point ground is maintained to avoid ground loop currents.
System Maintenance: Always power down the PLC system before removing or attaching the terminal block or the module itself to protect sensitive internal CMOS components from ESD and voltage surges.
Global Express Shipping
Returns & Warranty
| Product Image | Model Number / Title | Condition | Availability | Action |
|---|---|---|---|---|
|
Allen-Bradley 1746-NO8I SLC 500 Analog Output Module | Original New | In Stock | View Details |
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
Japan
|
A practical replacement guide for the GE Fanuc IC693CPU313, covering its embedded five-slot architecture, memory backup, firmware-dependent capacity and why it cannot use Series 90-30 expansion racks.
A field-focused comparison of Bently Nevada 3500/40M and 3500/42M monitor inputs, channel-pair configuration, rear I/O options, external termination hardware and firmware checks before replacement.
A field checklist for diagnosing Allen-Bradley 1746-NR4 RTD and resistance inputs, including sensor curves, lead compensation, excitation current, filter timing and channel diagnostics.
A field-focused checklist for replacing an Allen-Bradley 1785-L40B or planning a PLC-5/40 migration, covering backups, 1771 I/O mapping, DH+/RIO channels, revision risks and commissioning.
Replacing an Allen-Bradley 1747-SN scanner? Check SLC 500 logical rack and G-file mapping, link speed, cable termination, COMM/FAULT LEDs and hardware series before blaming the module or changing the...
Check 1771-IG TTL HIGH/LOW logic thresholds, field supply ripple and 1771-WC wiring before replacing an input module.
