Manufacturer: Omron
Product No.: S8JX-G10024CD
Country of origin:Japan
Product Type: Switch Mode Power Supplies
Payment: T/T, Western Union
Weight: 250g
Shipping port: Xiamen
Warranty: 12 months
Providing a highly stable DC power source for automated machinery, the Omron S8JX-G10024CD is a DIN rail-mounted, covered switch-mode power supply rated at 100 W. This unit converts standard wide-range AC inputs to a regulated 24 VDC output, making it an essential component for powering PLCs, sensors, HMI panels, and industrial control circuits. Engineered with a compact footprint and integrated safety protections, the S8JX-G10024CD ensures continuous uptime in harsh panel environments where space and thermal management are critical.
| Specification Parameter | Value / Detail |
|---|---|
| Manufacturer | Omron |
| Model Code | S8JX-G10024CD |
| Series | S8JX Series |
| Power Rating | 100 W |
| Rated Input Voltage | 100 to 240 VAC (Allowable range: 85 to 264 VAC, 50/60 Hz) |
| Output Voltage | 24 VDC |
| Output Current | 4.5 A |
| Voltage Adjustment Range | -10% to +15% (via front panel V.ADJ) |
| Overload Protection | 105% to 160% of rated current, inverted time delay, automatic reset |
| Overvoltage Protection | Yes, clamp-style shut-off |
| Mounting Configuration | DIN Rail-mounting |
| Enclosure Configuration | Covered / Enclosed |
| Operating Temperature | -20 to +60 degC (Refer to derating curves for high temperatures) |
| Unit Net Weight | 0.25 kg |
| Shipping Weight (Calculated) | 0.45 kg |
The S8JX-G series is a highly reliable legacy line. If you are retrofitting older control panels, note that the S8JX-G series is functionally replaced by the modern Omron S8VK-C or S8VK-G series. When swapping this unit with an S8VK model, verify depth dimensions and terminal layout, as the S8VK utilizes a slimmer, deeper profile compared to the flatter, wider footprint of the S8JX.
Thermal management is critical for the S8JX-G10024CD. In fully enclosed panels operating at ambient temperatures above 40 degC, output derating must be strictly applied. Avoid mounting multiple units side-by-side without at least a 15 mm air gap, as localized heat build-up will trigger the internal thermal protection or shorten the lifetime of the input electrolytic capacitors.
When connecting the input AC mains, ensure the protective earth (PE) terminal is securely grounded to the panel backplate to minimize high-frequency switching noise. If you utilize the front V.ADJ potentiometer to raise the output voltage to compensate for long field cable runs, verify that the terminal output does not exceed 27.6 VDC, as this can trigger the internal overvoltage protection (OVP) circuit and cause intermittent power cycling.
Mount the power supply vertically onto standard 35 mm DIN rail (DIN EN 50022), ensuring the ventilation slots on the top and bottom are completely unobstructed.
Connect a dedicated copper ground wire to the Protective Earth terminal. Do not chain this ground connection through other control panel devices.
Terminate the single-phase AC input lines (Line and Neutral) using insulated crimp terminals. Tighten terminal screws to the manufacturer-specified torque of 0.8 N-m to prevent loose-connection heating.
Connect the positive and negative 24 VDC output load wires. Turn on the AC mains, observe the green DC ON LED indicator, and check output voltage levels before applying load.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
Japan
|
SCADA sits above PLCs and RTUs: it acquires field data, alarms operators, and issues supervisory commands across plants and remote assets—without replacing local deterministic control.
A VFD turns fixed-frequency mains into controlled voltage and frequency so AC motors match real load—cutting pump and fan energy while tightening torque, soft-start, and braking behavior.
PLCs still run the plant floor: scan cycles, I/O, and IEC 61131-3 languages decide whether machines stay deterministic. Here is how controllers work, where they win, and where they strain.
Learning industrial automation now means mastering PLCs, networks, and protection systems—not just robots. This guide maps skills, pitfalls, and career paths for engineers entering control-heavy...
A practical guide to replacing aging Bailey Symphony operator stations running on OpenVMS Alpha. It compares Alpha emulation, OpenVMS x86 migration, OPC re-platforming, and phased ABB modernization.
Maintenance data connects work orders, sensor signals, asset history, costs, and technician knowledge. Used well, it improves planning, reliability, predictive maintenance, spare-parts control, and...
