Description
This is a Siemens 6AV7240-0AB07-0PA0, a SIMATIC IPC 477D series Panel PC designed for robust human-machine interface (HMI) and control applications in industrial environments. The unit features a 12-inch touch display for intuitive operator interaction and is powered by an Intel Celeron U827E processor with 2 GB of RAM. It comes equipped with a 240 GB MLC Solid-State Drive (SSD) and is pre-installed with the Windows 7 Ultimate 64-bit operating system. Connectivity is provided through multiple USB ports, an RS-232 serial port, and three Ethernet interfaces, including two Gigabit ports with PROFINET (PN) capability. The device operates on a standard 24 V DC industrial power supply.
Features
- 12-inch integrated touch display
- Intel Celeron U827E processor
- 2 GB of system memory (RAM)
- 240 GB Solid-State Drive (MLC) for reliable storage
- Pre-installed Microsoft Windows 7 Ultimate (64-bit)
- Two Gigabit Ethernet ports for Industrial Ethernet (IE) and PROFINET (PN)
- One standard 10/100/1000 Mbps Ethernet port
- Four rear-mounted USB ports and one RS-232 serial port
- Integrated 24 V DC industrial power supply input
Applications
- Process visualization and control
- Machine-level data acquisition and logging
- Manufacturing Execution Systems (MES) terminals
- Factory automation and assembly line control
- Building automation systems
Technical Specifications
| Specification |
Value |
| Brand |
Siemens |
| Model |
6AV7240-0AB07-0PA0 |
| Series |
SIMATIC IPC 477D |
| Product Type |
Panel PC |
| Display |
12-inch Touch Display |
| Processor |
Intel Celeron U827E |
| System Memory (RAM) |
2 GB |
| Storage |
240 GB SSD (MLC) |
| Operating System |
Windows 7 Ultimate (64-bit) |
| Ethernet Ports |
2x Gigabit Ethernet (IE/PN), 1x Ethernet (10/100/1000 Mbps) |
| USB Ports |
4x USB (Back) |
| Serial Port |
1x RS-232 |
| Expansion Slots |
Without PCIe |
| Power Supply |
24 V DC |
| Product Lifecycle Status |
Phase-Out |
| Package Dimensions (Calculated) |
28.0 x 15.0 x 15.0 cm |
| Shipping Weight |
3.20 kg |
| Country of Origin |
Germany (estimated) |
Installation Guidelines
CRITICAL WARNING: Risk of Electric Shock
Installation, modification, or removal of this device must be performed only by qualified electrical personnel. Always de-energize the entire system and apply appropriate Lockout/Tagout (LOTO) procedures before accessing any terminals or internal components. Failure to comply can result in severe injury or death.
-
1
System De-energization: Before installation, disconnect and lock out all power sources to the control panel or machine where the Panel PC will be installed. Verify the absence of voltage using a properly rated test instrument.
-
2
Panel Mounting: Prepare the panel cutout according to the manufacturer's dimensional drawings. Secure the Panel PC into the cutout using all provided mounting clamps, ensuring a uniform and tight seal to maintain the specified enclosure rating.
-
3
Protective Grounding: Connect the chassis ground terminal of the IPC to the main protective earth (PE) bus bar of the enclosure using a low-impedance conductor. A reliable ground connection is critical for safety and noise immunity.
-
4
Power and I/O Wiring: Connect the 24 V DC power supply, ensuring correct polarity. Connect all communication (Ethernet, USB, RS-232) and peripheral cables. Route signal and power cables separately to minimize electromagnetic interference.
-
5
System Commissioning: After verifying all connections, remove LOTO devices and re-apply power to the system. Power on the Panel PC and proceed with software configuration and system checks.