Siemens 6AV7240-3DB05-0PA0 SIMATIC IPC 477D Panel PC

Description

This is a Siemens SIMATIC IPC 477D, model 6AV7240-3DB05-0PA0, an industrial panel PC designed for demanding visualization and control tasks. It features a 19-inch touch display and is powered by an Intel Core i3-3217UE processor. The system is configured with 2 GB of RAM and a 240 GB MLC SSD for reliable data storage. Connectivity includes multiple Gigabit Ethernet ports, five USB ports, and an RS-232 serial interface. This unit operates on a 24 V DC industrial power supply and comes with Windows Embedded Standard 7 SP1 (64-bit, English) pre-installed. Note that this configuration does not include SIMATIC software or a PCIe expansion slot.

Features

• 19-inch resistive touch display for operator interface
• Intel Core i3-3217UE processor
• 2 GB of installed RAM
• 240 GB MLC Solid State Drive (SSD) for storage
• Multiple network interfaces: 2x Gigabit Ethernet (IE/PN) and 1x Ethernet (10/100/1000)
• Total of five USB ports (4 rear, 1 front) for peripheral connectivity
• Includes one RS-232 serial port
• Pre-installed with Windows Embedded Standard 7 SP1 (64-bit, English)
• Powered by a standard 24 V DC industrial supply

Applications

• Human-Machine Interface (HMI) for machine control
• Process visualization and SCADA systems
• Data acquisition and logging in industrial environments
• Control and monitoring in manufacturing and assembly lines
• Building automation and facility management

Technical Specifications

Installation Guidelines

1. 1 Prepare Mounting Location: Ensure the control panel or enclosure has a clean, flat, and appropriately sized cutout for the IPC. Verify that there is adequate clearance for ventilation and cable routing at the rear of the unit.
2. 2 Mount the Unit: Insert the Panel PC into the panel cutout from the front. Secure it from the rear using the provided mounting clamps. Tighten the clamp screws evenly in a cross pattern to ensure a uniform seal against the panel surface. Do not overtighten.
3. 3 Connect Protective Earth (PE): Connect the PE terminal on the IPC chassis to the main protective earth conductor of the control cabinet. Use a low-impedance connection with a short, large-gauge wire as required by local electrical codes. This is critical for safety and noise immunity.
4. 4 Connect Power Supply: Connect a stable, isolated 24 V DC power source to the power input terminals. Ensure correct polarity is observed. Use appropriately sized wiring and ensure the power supply is adequately protected by a fuse or circuit breaker.
5. 5 Connect Interfaces: Connect Ethernet, USB, and serial cables as required by the application. Use shielded cables for all data communication lines and ensure shields are properly terminated to ground at one end to minimize electrical noise interference.