Description
This is a SIMATIC Panel PC 670, model 6AV7611-0AA22-0BE0, from Siemens. It is a standard configuration panel-mount computer designed for human-machine interface (HMI) and control tasks in industrial environments. This specific unit features a 10-inch TFT display, a Pentium III 500 MHz CPU, 128 MB of RAM, and a 20 GB hard drive. It is configured for a 115-230 V power supply and includes a U.S. mains cable. The pre-installed operating system is Windows 98 in German. Please note that this product is considered obsolete by the manufacturer, making it a suitable replacement part for existing legacy systems.
Features
- 10-inch TFT color display for process visualization.
- Powered by a Pentium III 500 MHz processor.
- Equipped with 128 MB of system RAM.
- Includes a 20 GB internal hard drive for storage.
- Supports a wide input voltage range of 115-230V AC.
- Comes with a U.S. standard mains power cable.
- Pre-loaded with Windows 98 operating system (German language version).
Applications
- Legacy machine control and HMI replacement.
- Process visualization and data acquisition.
- Supervisory control in manufacturing cells.
- Factory automation and plant floor operations.
Technical Specifications
| Specification |
Value |
| Part Number |
6AV7611-0AA22-0BE0 |
| Manufacturer |
Siemens |
| Product Series |
SIMATIC Panel PC 670 |
| Product Type |
Panel PC |
| Display Size |
10 inch |
| Display Type |
TFT |
| Processor (CPU) |
Pentium III, 500 MHz |
| Memory (RAM) |
128 MB |
| Storage |
20 GB Hard Drive (HD) |
| Input Voltage |
115-230 V |
| Included Accessories |
U.S. Mains Cable |
| Operating System |
Windows 98 (German Language) |
| Product Lifecycle Status |
Obsolete |
| Shipping Weight |
4.00 kg |
| Commodity Code |
85371091 |
| ECCN |
N |
| Country of Origin |
Germany (Estimated) |
| Package Dimensions (Calculated) |
40 cm x 30 cm x 15 cm |
Installation Guidelines
CRITICAL WARNING: Electrical hazard. Installation must be performed by qualified personnel only. Disconnect and lock out all power sources to the enclosure before installing or removing this unit. Failure to comply can result in severe injury or death.
-
1
Verify that the panel cutout dimensions match the PC 670's physical requirements. Ensure the mounting surface is clean, flat, and rigid enough to support the unit's weight.
-
2
Insert the Panel PC into the cutout from the front of the enclosure. Secure it from the rear using the provided mounting clamps, tightening them evenly to ensure a proper seal against the panel gasket. Do not over-torque the clamps.
-
3
Connect the unit to a dedicated functional earth (FE) or protective earth (PE) terminal within the cabinet using a low-impedance conductor. A secure ground connection is essential for noise immunity and safety.
-
4
Connect the main power supply using the provided U.S. mains cable to a stable power source within the specified 115-230V range. Ensure the power source is properly fused or protected by a circuit breaker.
-
5
Connect all required communication and I/O cables. Route cables away from high-voltage lines and sources of electromagnetic interference (EMI) to maintain signal integrity.
-
6
After verifying all connections are secure, restore power to the cabinet and power on the unit for functional testing and configuration.