Siemens 6AV7612-0AE20-0BE0 SIMATIC Panel PC 670 Panel PC

Description

This is a Siemens 6AV7612-0AE20-0BE0, a SIMATIC Panel PC 670 designed for industrial human-machine interface (HMI) and control applications. This standard configuration model features a 12-inch TFT touch display, a 300 MHz Celeron CPU, 128 MB of RAM, and a 40 GB hard drive. It is pre-loaded with a German-language version of the Windows 98 operating system. The unit is designed for a wide input voltage range of 115-230V AC and is supplied with a U.S. mains cable. As an obsolete product, this Panel PC is a critical component for maintaining or repairing legacy automation systems that rely on this specific hardware platform.

Features

• 12-inch TFT color touch display for operator interaction
• Powered by an Intel Celeron 300 MHz processor
• Equipped with 128 MB of system RAM
• Includes a 40 GB internal hard drive for OS and application storage
• Pre-installed with Windows 98 (German language)
• Obsolete product status, ideal for legacy system support and spares

Applications

• Machine control and process visualization
• Supervisory control and data acquisition (SCADA) nodes
• Manufacturing execution systems (MES) terminals
• Direct replacement for failed units in existing installations

Technical Specifications

Installation Guidelines

1. 1
   De-energize Equipment: Before beginning installation, completely disconnect and lock out all power sources to the control cabinet or machine. Verify the absence of voltage using a calibrated multimeter.
2. 2
   Verify Panel Cutout: Ensure the panel cutout dimensions match the requirements for the Panel PC 670. Clean the mounting surface to ensure a proper seal.
3. 3
   Handle with ESD Precautions: Use an anti-static wrist strap and work on a grounded mat. Avoid touching connector pins and circuit board components to prevent electrostatic discharge damage.
4. 4
   Mount the Unit: Insert the Panel PC into the cutout from the front of the enclosure. Secure it from the rear using the provided mounting clamps, tightening them evenly to the specified torque to ensure a proper seal.
5. 5
   Connect Power and Ground: Connect the protective earth (PE) conductor to the designated terminal. Securely connect the mains power cable to the unit's power input.
6. 6
   Connect Interfaces: Connect all required communication (e.g., Ethernet, serial) and peripheral (e.g., keyboard, mouse) cables. Ensure all connectors are fully seated and secured.
7. 7
   Final Check and Power-Up: After a final inspection of all connections, remove the LOTO device and re-apply power to the cabinet. Verify the Panel PC boots correctly and establishes communication with the control system.