Description
This is a Siemens SIMATIC Panel PC 670, model 6AV7612-0AF30-0CJ0, designed for industrial human-machine interface (HMI) applications. The unit features a 12-inch TFT touch display for operator interaction and process visualization. It is equipped with a 300 MHz Celeron CPU, 256 MB of RAM, and a 40 GB hard drive with an integrated CD-ROM drive. This configuration is pre-loaded with the Windows NT 4.0 operating system in English and is designed for a 115-230V AC power supply.
Features
-
12-inch TFT color touch display
-
Intel Celeron processor operating at 300 MHz
-
256 MB of installed RAM
-
40 GB hard disk drive for data storage
-
Integrated CD-ROM drive
-
Pre-installed with Windows NT 4.0 (English)
-
Includes a European mains power cable
Applications
-
Machine control and process visualization
-
Data acquisition and logging systems
-
Factory automation and SCADA nodes
-
Operator control stations in manufacturing environments
Technical Specifications
| Specification |
Value |
| Brand |
Siemens |
| Model |
6AV7612-0AF30-0CJ0 |
| Product Series |
SIMATIC Panel PC 670 |
| Product Type |
Panel PC |
| Display |
12-inch TFT Touch Display |
| Processor (CPU) |
Celeron 300 MHz |
| Memory (RAM) |
256 MB |
| Storage |
40 GB Hard Drive (HD) |
| Optical Drive |
CD-ROM |
| Operating System |
Windows NT 4.0 (English) |
| Input Voltage |
115-230 V AC |
| Product Lifecycle Status |
Obsolete |
| Shipping Weight |
4.00 kg |
| Commodity Code |
85371091 |
| Export Control (ECCN) |
N |
| Country of Origin |
Germany (Estimate) |
| Package Dimensions (Calculated) |
45 cm x 35 cm x 20 cm |
Installation Guidelines
CRITICAL WARNING: Hazardous voltages are present. Installation, wiring, and maintenance must be performed by qualified personnel only. Ensure the equipment is de-energized and locked out/tagged out (LOTO) before commencing any work. Failure to comply can result in severe injury or death.
-
Verify Panel Cutout
Ensure the mounting cutout in the enclosure or panel door matches the required dimensions for the Panel PC 670. Deburr all sharp edges to prevent damage to gaskets and ensure a proper seal.
-
Mount the Unit
Insert the Panel PC into the cutout from the front. Secure it from the rear using the provided mounting clamps. Tighten the clamp screws evenly in a cross-pattern to ensure uniform pressure on the gasket for a proper seal. Do not overtighten.
-
Connect Protective Earth (PE)
Connect the chassis grounding terminal to the enclosure's protective earth bus bar using a low-impedance conductor. This is a critical safety connection.
-
Connect Power Supply
Connect the 115-230V AC mains supply to the power input terminal. Ensure the source voltage matches the unit's rating. Use the provided European mains cable or an equivalent certified cable.
-
Connect Peripherals and Network
Connect any required communication cables (e.g., Ethernet, serial) and peripherals (e.g., keyboard, mouse). Route cables to avoid interference from high-power lines.