Description
This is a Siemens SIMATIC Panel PC 670, model 6AV7613-0AA12-0AH0, designed for human-machine interface (HMI) and control tasks in industrial environments. The unit features a 12-inch TFT display and is powered by a Pentium III 500 MHz CPU with 64 MB of RAM. It includes a 20 GB hard drive pre-installed with a German-language version of Windows NT 4.0 and operates on a 24 V DC power supply. Please note that this model is considered an obsolete part, often used for maintaining existing systems.
Features
-
Integrated 12-inch TFT color display
-
Pentium III 500 MHz processor for control applications
-
Equipped with 64 MB RAM and a 20 GB hard drive
-
Operates on a standard 24 V DC industrial power supply
-
Pre-loaded with Windows NT 4.0 (German language)
Applications
-
Legacy system maintenance and spare parts replacement
-
Machine-level operator control and process visualization
-
Data acquisition and logging in manufacturing environments
Technical Specifications
| Specification |
Value |
| Brand |
Siemens |
| Model Number |
6AV7613-0AA12-0AH0 |
| Product Series |
SIMATIC Panel PC 670 |
| Product Type |
Panel PC |
| Display |
12 inch TFT |
| Processor (CPU) |
Pentium III, 500 MHz |
| Memory (RAM) |
64 MB |
| Storage |
20 GB Hard Drive (HD) |
| Power Supply |
24 V DC |
| Operating System |
Windows NT 4.0 (German) |
| Product Lifecycle Status |
Obsolete |
| Shipping Weight |
12.00 kg |
| Commodity Code |
85371091 |
| ECCN |
N |
| Country of Origin |
Germany (Estimated) |
| Package Dimensions (Calculated) |
35.0 x 25.0 x 25.0 cm |
Installation Guidelines
CRITICAL WARNING: Electrical Hazard. Disconnect and lock out all power sources before installation or maintenance. This equipment must be installed by qualified personnel in compliance with all applicable electrical codes. Failure to do so can result in severe injury or death.
-
1
Verify the panel cutout dimensions are correct for the PC 670 chassis. Ensure the mounting surface is flat, clean, and can support the weight of the unit.
-
2
Insert the Panel PC into the cutout and secure it using all provided mounting clamps. Tighten clamps evenly to the manufacturer's specified torque to ensure a proper seal and prevent chassis distortion.
-
3
Connect a low-impedance protective earth (PE) ground to the designated terminal on the chassis. This is critical for both safety and noise immunity.
-
4
Connect the 24 V DC power supply. Verify correct polarity (+/-) before energizing the circuit. Use appropriately sized wiring for the load and distance.
-
5
Connect all required communication and I/O cables. Ensure proper shielding and grounding practices are followed for all data cables to minimize electrical noise interference.