Siemens 6AV7613-0AF22-0AF0 SIMATIC Panel PC 670 Panel PC

Description

The Siemens 6AV7613-0AF22-0AF0 is a SIMATIC Panel PC 670, an industrial-grade computer designed for human-machine interface (HMI) and control tasks in demanding environments. This unit features a 12-inch TFT display and is powered by a Pentium III 500 MHz CPU. It is configured with 128 MB of RAM, a 40 GB hard drive, and an integrated CD-ROM drive. The system operates on a 24 VDC power supply and comes pre-installed with the Windows 98 English operating system. Note that this product is considered obsolete by the manufacturer, making it suitable for legacy system maintenance and spare parts inventory.

Features

• 12-inch TFT color display for process visualization.
• Intel Pentium III 500 MHz processor.
• 128 MB of installed RAM.
• 40 GB internal hard drive for data and application storage.
• Integrated CD-ROM drive for software installation and data transfer.
• Operates on a nominal 24 VDC power input.
• Pre-loaded with Windows 98 English operating system.

Applications

• Human-Machine Interface (HMI) stations for machine control.
• Supervisory Control and Data Acquisition (SCADA) clients.
• Process visualization and monitoring in manufacturing plants.
• Data logging and reporting terminals.
• Replacement unit for existing SIMATIC PC 670 installations.

Technical Specifications

Installation Guidelines

1. 1 Verify the panel cutout dimensions are correct for the PC 670 unit. Ensure the mounting surface is clean, flat, and can support the weight of the device (12.00 kg).
2. 2 Insert the Panel PC into the cutout from the front. Secure it from the rear using the provided mounting clamps, tightening them evenly to the manufacturer's specified torque to ensure a proper seal and prevent chassis distortion.
3. 3 Connect a dedicated protective earth (PE) or functional ground conductor to the designated grounding terminal on the chassis. A low-impedance ground connection is critical for safety and noise immunity.
4. 4 Connect the 24 VDC power supply, ensuring correct polarity. Use appropriately sized conductors for the load and route power cables separately from communication and I/O signal lines to minimize electromagnetic interference.
5. 5 Connect all necessary communication cables (e.g., Ethernet, serial) and peripherals. Ensure all connectors are fully seated and secured. After all connections are made, remove the lockout/tagout device and apply power to the unit.