Description
The Siemens 6AV7613-2DB22-0CH0 is a Panel PC from the SIMATIC PC 670 series, designed for human-machine interface (HMI) and control applications. This unit features a 12-inch TFT display and is powered by an Intel Pentium III 500 MHz CPU. It is equipped with 128 MB of RAM and a 20 GB hard drive for data storage and application hosting. The system comes pre-installed with the Windows NT 4.0 German operating system and includes a ProTool/Pro Runtime license supporting up to 2048 Power Tags. This configuration is intended for legacy system maintenance and support, operating on a 115-230V AC power supply.
Features
-
12-inch TFT color display for process visualization.
-
Intel Pentium III processor operating at 500 MHz.
-
128 MB of system RAM.
-
20 GB hard drive and integrated CD-ROM drive.
-
Pre-installed Windows NT 4.0 operating system (German language).
-
Includes ProTool/Pro Runtime License for up to 2048 Power Tags.
Applications
-
Legacy machine control and process visualization.
-
Plant-floor data acquisition and monitoring systems.
-
Direct replacement for existing SIMATIC PC 670 installations.
-
Small-scale SCADA nodes in industrial environments.
Technical Specifications
| Specification |
Value |
| Brand |
Siemens |
| Part Number |
6AV7613-2DB22-0CH0 |
| Series |
SIMATIC Panel PC 670 |
| Product Type |
Panel PC |
| Product Lifecycle Status |
Obsolete |
| Display |
12-inch TFT |
| CPU |
Pentium III, 500 MHz |
| RAM |
128 MB |
| Storage |
20 GB Hard Drive, CD-ROM Drive |
| Operating System |
Windows NT 4.0 (German) |
| Included License |
ProTool/Pro Runtime |
| License Limit |
2048 Power Tags |
| Input Voltage |
115-230 V AC |
| Included Cable |
European Mains Cable |
| Shipping Weight |
12.00 kg |
| Commodity Code |
85371091 |
| ECCN |
N |
| Country of Origin |
Germany (Estimate) |
| Manufacturer |
Siemens |
| Package Dimensions (Calculated) |
35.0 x 25.0 x 25.0 cm |
Installation Guidelines
CRITICAL WARNING: HAZARD OF ELECTRIC SHOCK
All installation and maintenance procedures must be performed by qualified personnel only. Ensure the control cabinet is completely de-energized and locked out/tagged out (LOTO) before beginning any work. Failure to disconnect power can result in severe injury or death.
-
1
Prepare the panel cutout according to the device's mechanical specifications. Verify dimensions and ensure the mounting surface is clean, flat, and rigid.
-
2
Insert the Panel PC into the cutout from the front of the enclosure. Secure it from the rear using the provided mounting clamps, tightening them evenly to the manufacturer's recommended torque to ensure a proper seal.
-
3
Connect a dedicated protective earth (PE) or grounding conductor to the designated terminal on the PC chassis. This connection is critical for safety and noise immunity.
-
4
Connect the 115-230V AC power supply using the provided mains cable to a properly rated and protected circuit. Ensure all communication and I/O cables are routed away from high-voltage lines to minimize interference.
-
5
After verifying all connections, remove the LOTO device and re-energize the cabinet. Power on the Panel PC and confirm that the operating system boots correctly.