Siemens 6AV7614-0AA10-0BH0 SIMATIC Panel PC 670 Panel PC

Description

The Siemens 6AV7614-0AA10-0BH0 is a SIMATIC Panel PC 670, an integrated operator panel designed for machine-level control and visualization tasks in industrial environments. This standard configuration unit features a 15-inch TFT touch display, a Celeron 300 MHz CPU, and is equipped with 64 MB of RAM and a 20 GB hard drive. It is pre-loaded with the German language version of Windows NT 4.0 and is powered by a 115-230 V AC supply, with a U.S. mains cable included. As a legacy component, this Panel PC is suitable for maintaining or repairing existing automation systems that utilize the PC670 platform.

Features

• Integrated 15-inch TFT color display with touch functionality.
• Powered by an Intel Celeron 300 MHz processor.
• Equipped with 64 MB of system memory (RAM).
• Includes a 20 GB internal hard drive for storage.
• Pre-installed with Windows NT 4.0 operating system (German language version).
• Supports a wide input voltage range of 115-230 V AC.
• Includes a U.S. standard mains power cable.

Applications

• Human-Machine Interface (HMI) for industrial machinery.
• Process visualization and control systems.
• Data acquisition and logging at the machine level.
• Replacement unit for existing SIMATIC PC 670 installations.
• Manufacturing Execution System (MES) terminals.

Technical Specifications

Installation Guidelines

1. 1
   De-energize Equipment: Before installation, completely disconnect and isolate all power sources to the control cabinet or panel. Verify the absence of voltage using a calibrated multimeter. Apply appropriate Lockout/Tagout (LOTO) devices.
2. 2
   Prepare Panel Cutout: Ensure the mounting cutout in the enclosure door or panel meets the dimensional requirements for the PC 670 chassis. The surface must be clean, flat, and free of burrs to ensure a proper seal.
3. 3
   Mount the Unit: Insert the Panel PC into the cutout from the front. Secure it from the rear using the provided mounting clamps. Tighten the clamp screws evenly in a diagonal pattern to ensure uniform pressure on the gasket for a proper seal.
4. 4
   Connect Protective Earth (PE): Connect the designated Protective Earth (PE) terminal on the Panel PC chassis to the enclosure's main ground bus using a low-impedance conductor. This is a critical safety connection.
5. 5
   Connect Power and Peripherals: Connect the 115-230 V AC power supply using the provided mains cable. Connect any required communication cables (e.g., Ethernet) and peripherals (e.g., keyboard, mouse) to their respective ports.
6. 6
   Final Checks and Power-Up: After all connections are secure, remove LOTO devices and re-energize the main panel supply. Power on the Panel PC and verify correct boot-up and operation.