Description
This is a Siemens 6AV7615-0AB32-0BG0, a SIMATIC Panel PC 670 designed for industrial human-machine interface (HMI) applications. This unit features a 15-inch TFT display and is powered by a Pentium III 500 MHz CPU. The standard configuration includes 256 MB of RAM, a 20 GB hard drive, and an integrated CD-ROM drive. It is pre-installed with a multi-language version of Windows 2000 and is configured for a 115-230V AC power supply, including a U.S. mains cable.
Features
- 15-inch TFT color display for clear process visualization.
- Intel Pentium III 500 MHz processor.
- 256 MB of installed system memory (RAM).
- 20 GB internal hard drive for operating system and application storage.
- Integrated CD-ROM drive for software installation and data access.
- Pre-loaded with Windows 2000 (Multi-Language: EN, GER, FR, IT, SP).
- Flexible power input range of 115-230V AC.
Applications
- Machine-level operator control and monitoring.
- Process visualization and data logging in manufacturing plants.
- Supervisory control and data acquisition (SCADA) nodes.
- Industrial automation control rooms.
Technical Specifications
| Specification |
Value |
| Brand |
Siemens |
| Model |
6AV7615-0AB32-0BG0 |
| Series |
SIMATIC Panel PC 670 |
| Product Type |
Panel PC |
| Display |
15-inch TFT |
| Processor (CPU) |
Pentium III, 500 MHz |
| Memory (RAM) |
256 MB |
| Storage |
20 GB Hard Drive (HD) |
| Optical Drive |
CD-ROM |
| Power Supply |
115-230 V AC (with U.S. mains cable) |
| Operating System |
Windows 2000 Multi-Language (EN, GER, FR, IT, SP) |
| Product Lifecycle Status |
Obsolete |
| Shipping Weight |
4.00 kg |
| Commodity Code |
85371091 |
| ECCN |
N |
| Country of Origin |
Germany (Estimate) |
| Manufacturer |
Siemens |
| Package Dimensions (Calculated) |
45 cm x 35 cm x 15 cm |
Installation Guidelines
CRITICAL WARNING: RISK OF ELECTRIC SHOCK
Disconnect all power sources before installation, servicing, or removal. All work must be performed by qualified personnel familiar with industrial control equipment standards and safety procedures. Failure to comply can result in severe injury or equipment damage.
-
1
Prepare Mounting Location: Ensure the panel cutout dimensions are correct and the mounting surface is clean, flat, and can support the weight of the unit. Verify adequate clearance for ventilation and cable routing.
-
2
Secure the Unit: Insert the Panel PC into the cutout from the front. Secure it from the rear using the provided mounting clamps, tightening them evenly to the manufacturer's specified torque to ensure a proper seal.
-
3
Connect Protective Earth (PE): Connect the designated PE terminal on the unit to the main panel's protective earth conductor using a low-impedance connection. This is a critical safety step.
-
4
Connect Power Supply: Connect the 115-230V AC mains cable to the unit's power input connector. Ensure the source voltage matches the equipment rating and is properly fused.
-
5
Connect Peripherals: Connect any required communication cables (e.g., Ethernet, serial) and I/O devices. Route cables to prevent strain and interference.
-
6
Final Check and Power-Up: Before energizing, double-check all connections. Once confirmed, apply power to the unit and verify correct boot-up and operation.