Description
This Siemens 6AV7615-0AF10-0AJ0 is a SIMATIC Panel PC 670 designed for industrial human-machine interface (HMI) and control applications. It features a 15-inch TFT display and is powered by a Celeron 300 MHz CPU. This standard configuration includes 64 MB of RAM, a 40 GB hard drive, and an integrated CD-ROM drive. The unit operates on a 24 V DC power supply and comes pre-installed with the Windows NT 4.0 English operating system. As an obsolete component, it serves as a direct replacement for maintaining legacy automation systems.
Features
- 15-inch color TFT display for process visualization
- Intel Celeron 300 MHz processor
- 64 MB of system RAM
- 40 GB hard disk drive for OS and application storage
- Integrated CD-ROM drive
- Operates on a nominal 24 V DC industrial power source
- Pre-loaded with Windows NT 4.0 (English)
Applications
- Legacy HMI system replacement and maintenance
- Machine-level data acquisition and control
- Industrial process visualization
- Factory automation control panels
Technical Specifications
| Specification |
Value |
| Manufacturer |
Siemens |
| Product Series |
SIMATIC Panel PC 670 |
| Model Number |
6AV7615-0AF10-0AJ0 |
| Display |
15-inch TFT |
| CPU |
Celeron 300 MHz |
| RAM |
64 MB |
| Storage |
40 GB Hard Drive, CD-ROM Drive |
| Power Supply |
24 V DC |
| Operating System |
Windows NT 4.0 (English) |
| Product Lifecycle Status |
Obsolete |
| Shipping Weight |
4.00 kg |
| Commodity Code |
85371091 |
| ECCN |
N |
| Country of Origin |
Germany (Estimate) |
| Package Dimensions (Calculated) |
50 x 40 x 20 cm |
Installation Guidelines
CRITICAL WARNING
Disconnect all power sources before installation or removal. Failure to de-energize the system can result in electric shock, equipment damage, or unintended machine operation. Verify the absence of voltage before proceeding.
-
1
Prepare Panel Cutout: Verify that the enclosure cutout dimensions match the Panel PC's mounting requirements. Ensure the mounting surface is clean, flat, and free of debris.
-
2
Mount the Unit: Insert the Panel PC into the cutout from the front of the enclosure. Secure it from the rear using the provided mounting clamps, tightening them evenly to ensure a proper seal against the panel gasket. Do not overtighten.
-
3
Connect Protective Earth (PE): Connect a low-impedance protective earth conductor to the designated grounding terminal on the Panel PC chassis. This is critical for operator safety and noise immunity.
-
4
Connect DC Power: Connect the 24 V DC power supply to the unit's power input terminals. Strictly observe correct polarity (+/-). Using an incorrect voltage or reversing polarity may permanently damage the device.
-
5
Connect Peripherals: Connect any required network, serial, or USB cables. Ensure all connectors are fully seated and secured. Power on the system and verify correct operation.