Description
This Siemens 6AV7703-1DC10-0AC0 is a SIMATIC Panel PC 870 standard configuration unit designed for industrial human-machine interface (HMI) applications. It features a 12.1-inch color TFT display, a Pentium III 1.26 GHz processor, and 128 MB of RAM. The system is equipped with a 40 GB EIDE hard drive, an integrated CD-ROM drive, and comes pre-installed with Windows NT 4.0 SP5 Workstation (English). It is configured for a 230V mains supply and includes a mains cable with a European plug. Note that this product is considered obsolete, making it suitable for maintaining or repairing legacy automation systems.
Features
- 12.1-inch Color TFT Display
- Pentium III 1.26 GHz Processor
- 128 MB RAM
- 40 GB EIDE Hard Drive
- Integrated CD-ROM Drive
- Pre-installed Windows NT 4.0 SP5 Workstation (English)
- Includes mains cable with European plug
Applications
- Machine control interfaces
- Process visualization and monitoring
- Data logging and acquisition systems
- Factory floor automation control
- Legacy system maintenance and support
Technical Specifications
| Specification |
Value |
| Manufacturer |
Siemens |
| Product Series |
SIMATIC Panel PC |
| Model Number |
6AV7703-1DC10-0AC0 |
| Product Type |
Panel PC |
| Display |
12.1-inch Color TFT |
| Processor |
Pentium III 1.26 GHz |
| Memory (RAM) |
128 MB |
| Storage |
40 GB HDD EIDE |
| Optical Drive |
CD-ROM |
| Operating System |
Windows NT 4.0 SP5 Workstation (English) |
| Input Voltage |
230V |
| Power Cable |
Included, with European plug |
| Product Lifecycle Status |
Obsolete |
| Country of Origin |
Germany (Estimate) |
| Package Dimensions (Calculated) |
38.0 cm x 33.0 cm x 10.0 cm |
| Shipping Weight |
19.00 kg |
Installation Guidelines
CRITICAL WARNING: Risk of Electric Shock
Installation must be performed exclusively by qualified personnel. Disconnect and lock out all power sources before accessing terminals or performing any installation, wiring, or maintenance activities. Failure to comply can result in severe injury or death.
-
1
Ensure the control cabinet or panel is fully de-energized and locked out according to safety procedures before beginning installation.
-
2
Verify the panel cutout dimensions are correct for the Panel PC chassis. Ensure a clean, flat, and rigid mounting surface.
-
3
Insert the Panel PC into the cutout and secure it evenly from the rear using all provided mounting clamps. Do not overtighten.
-
4
Connect the provided 230V mains cable to the unit's power inlet and to a properly rated and protected power source.
-
5
Establish a low-impedance connection from the chassis grounding point to the main protective earth (PE) busbar of the cabinet.
-
6
Connect all required communication, peripheral, and I/O cables. Ensure proper strain relief and cable routing to prevent interference.
-
7
After verifying all connections are secure and correct, remove the lockout/tagout devices and re-energize the main panel supply to commission the unit.