Siemens 6AV7725-1BC00-0AA0 SIMATIC Panel PC 670

Description

The Siemens 6AV7725-1BC00-0AA0 is a SIMATIC Panel PC 670 designed for industrial human-machine interface (HMI) and control applications. This standard configuration features a 15.1-inch color TFT display, an Intel Pentium III 1.26 GHz processor, and 128 MB of SDRAM-133 memory. It is equipped with a 40 GB EIDE hard disk drive for data and application storage. The unit includes an integrated power supply compatible with 115-230V AC sources and is delivered without a pre-installed operating system, providing flexibility for custom software environments. This model is noted as an obsolete product in the Siemens PLM lifecycle.

Features

• 15.1-inch Color TFT Display for clear process visualization.
• Powered by an Intel Pentium III 1.26 GHz processor.
• Configured with 128 MB SDRAM-133 system memory.
• Includes a 40 GB EIDE internal hard disk drive.
• Integrated power supply for 115-230V AC input.
• Supplied without a pre-installed operating system for custom deployment.
• Includes a European mains power cable.

Applications

• Machine-level operator control and monitoring
• Process visualization and data acquisition (SCADA)
• Industrial data logging and reporting
• Factory automation control panels

Technical Specifications

Installation Guidelines

1. 1 Ensure all power sources to the control panel or enclosure are de-energized and locked out before beginning installation. Verify the absence of voltage.
2. 2 Prepare the panel cutout according to the device's mechanical specifications. Ensure the mounting surface is clean, flat, and free of debris to maintain the intended IP rating.
3. 3 Insert the Panel PC into the cutout from the front of the enclosure. Secure it from the rear using the provided mounting clamps. Tighten the clamps evenly in a cross-pattern to ensure a uniform seal.
4. 4 Connect a protective earth (PE) conductor to the designated grounding terminal on the Panel PC chassis. This is a critical safety connection.
5. 5 Connect the 115-230V AC power supply using the provided mains cable to a properly rated and protected power source.
6. 6 Connect all required communication and peripheral cables (e.g., Ethernet, USB, serial) to their respective ports.
7. 7 After verifying all connections are secure and correct, remove the lockout/tagout devices and re-energize the main power supply to the enclosure.