Description
This is a Siemens 6AV7813-0BB11-1AC0 SIMATIC Panel PC 877, an industrial computer designed for machine-level control and visualization tasks. It features a 15-inch keypad display with a 1024x768 resolution, powered by an Intel Pentium 4 2.8 GHz processor. The system is configured with 512MB of DDR266 SDRAM, an 80 GB EIDE hard disk drive, and a DVD-ROM drive. It operates on a 110-230V AC power supply and comes pre-installed with Windows XP Professional with a multi-language user interface.
Features
-
15-inch display with integrated keypad for operator input.
-
1024 x 768 pixel screen resolution for clear process visualization.
-
Intel Pentium 4 processor operating at 2.8 GHz with a 533 MHz FSB.
-
Equipped with 512 MB of DDR266 SDRAM.
-
Includes an 80 GB EIDE 3.5" hard disk drive and a DVD-ROM drive.
-
Pre-loaded with Windows XP Professional (Multi-Language User Interface).
Applications
-
Human-Machine Interface (HMI) for manufacturing lines.
-
Process control and data acquisition systems.
-
Industrial automation and SCADA client nodes.
-
Machine-level data logging and diagnostics.
Technical Specifications
| Specification |
Value |
| Manufacturer |
Siemens |
| Product Series |
SIMATIC Panel PC 877 |
| Display |
15" Keypad Interface |
| Resolution |
1024 x 768 pixels |
| Processor |
Intel Pentium 4, 2.8 GHz |
| Front Side Bus (FSB) |
533 MHz |
| Cache |
512KB SLC |
| Memory (RAM) |
512 MB DDR266 SDRAM (1x512MB) |
| Storage |
80 GByte EIDE 3.5" Hard Disk Drive |
| Optical Drive |
DVD-ROM |
| Operating System |
Windows XP Professional MUI (EN, GE, FR, IT, SP, JP, CHN, KOR) |
| Power Supply |
110-230V AC |
| Power Cable |
Europe standard |
| Product Lifecycle Phase |
Obsolete |
| Shipping Weight |
19.00 kg |
| Package Dimensions |
40.00 x 60.00 x 40.00 cm |
| Commodity Code |
85371091 |
| ECCN |
5D002 |
| Country of Origin |
Germany (Estimate) |
Installation Guidelines
CRITICAL WARNING: Hazardous voltages are present. Installation must be performed by qualified personnel only. Ensure the control cabinet is de-energized and locked out before beginning work. Failure to comply can result in severe injury or death.
-
1
Verify the control cabinet is de-energized and locked out according to safety procedures.
-
2
Prepare the panel cutout according to the device's mechanical specifications. Ensure the mounting surface is clean and flat.
-
3
Insert the Panel PC into the cutout from the front and secure it evenly using the provided mounting clamps. Do not overtighten.
-
4
Connect a low-impedance protective earth (PE) conductor to the designated grounding terminal on the PC chassis.
-
5
Connect the 110-230V AC power supply cable to the unit's power input connector. Ensure the cable is properly secured.
-
6
Connect all required communication, peripheral, and I/O cables. Route cables to prevent strain and interference.
-
7
After verifying all connections are secure, close the cabinet door, remove the lockout/tagout device, and re-energize the system.