Siemens 6AV7872-0BA20-0AC0 SIMATIC Panel PC 677B 15-inch Touch Panel PC

Description

The Siemens 6AV7872-0BA20-0AC0 is a SIMATIC Panel PC 677B designed for industrial control and visualization applications. This unit features a 15-inch touchscreen display with a resolution of 1024 x 768 pixels, providing a clear interface for machine operation and process monitoring. It is powered by an Intel Celeron M 440 processor at 1.86 GHz and is equipped with 1 GB of DDR2 RAM and a 160 GB internal storage drive. Connectivity options include dual Gigabit Ethernet ports, multiple USB 2.0 interfaces, and a serial port, making it suitable for integration into various factory automation networks.

Features

• 15-inch Touchscreen Display (1024 x 768 resolution)
• Intel Celeron M 440 Processor (1.86 GHz)
• 1 GB DDR2 RAM
• 160 GB Internal Storage
• Dual 10/100/1000 Mbit/s Ethernet Ports
• Four rear USB 2.0 ports and one front-side USB port
• Integrated 110/230V AC Power Supply
• Two PCI slots for hardware expansion

Applications

• Machine Control Interfaces (HMI)
• Process Visualization and SCADA Systems
• Data Logging and Acquisition
• Factory Floor Information and Control Systems
• Building Automation

Technical Specifications

Installation Guidelines

1. 1 Ensure the main power supply to the enclosure is completely disconnected and locked out. Verify the absence of voltage with a properly rated multimeter.
2. 2 Verify that the panel cutout dimensions match the requirements for the PC 677B chassis. Ensure the mounting surface is clean, flat, and can support the unit's weight.
3. 3 Carefully insert the Panel PC into the cutout from the front of the panel. Ensure the gasket is properly seated to maintain the enclosure's IP rating.
4. 4 From the rear, install and tighten the mounting clamps evenly in a cross-pattern to secure the unit firmly against the panel surface. Do not overtighten.
5. 5 Connect a low-impedance protective earth (PE) conductor to the designated grounding terminal on the chassis. This connection is critical for safety.
6. 6 Connect the 110/230V AC power cable to the unit's power input connector. Ensure the source voltage matches the unit's rating.
7. 7 Connect Ethernet, USB, and any other required peripheral cables. Route cables to prevent strain and interference.
8. 8 After verifying all connections are secure and correct, remove the LOTO device and re-energize the cabinet. Power on the Panel PC and verify its operation.